User Manual
Table Of Contents
- INTRODUCTION
- BASIC SETUP
- BASIC OPERATIONS
- XG-100P Controls
- Top Display
- Main Display
- Menu Navigation
- Before First Time Use
- Power On and Set Volume
- Select Channel Bank
- Select Channel Using Knob
- Turn Encryption On or Off
- Select Zone Using Menus
- Make an Individual Call
- Make a Priority Call
- Select a New Talkgroup
- Use Talkaround to Bypass Repeater
- Start Scan
- Stop Scan
- Nuisance Delete
- View GPS Information
- Emergency Operation
- ADVANCED OPERATIONS
- PROGRAMMING
- REFERENCE
- GLOSSARY
- INDEX
93
XG-100
ADVANCED OPERATIONS
4
Set or Remove Priority (PRI)
Priority (PRI) channels are scanned more often than non-priority channels. The
priority 1 channel is the channel that is currently selected using the channel knob
on top of the radio.
Custom scan configuration screens are shown here. Zone scan configuration is
similar.
1. Enter Set up Scan.
2. Use to highlight
scan list.
3. Use to select
OPTIONS.
4. Use to highlight and
select VIEW/EDIT.
5. Use to highlight
channel.
6. Use to select
OPTIONS.