MSDS

ManualsBrandsHarris ManualsOutdoorsBed Bug Trap Value Pack

Material Data Safety Sheet

Version No

Date

Reason for Revision

01/29/12

First Issue

1.1 PRODUCT IDENTIFICATION: Harris Bed Bug Traps

1.2 PRODUCT USE: Insect Monitoring Trap

1.3 COMPANY: P. F. Harris Manufacturing Company, LLC, P. O. Box 1122 Alpharetta, GA 30009

1.4 EMERGENCY TELEPHONE: 800 637 0317

2.0 HAZARD IDENTIFICATION: None Identified

The trap substrate contains no hazardous ingredients. The adhesive can be unpleasant to handle due to its sticky nature but represents a very low

hazard. The attractant is a permitted food ingredient.

3.0 COMPOSITION:

CHEMICAL NAME

OTHER NAMES

Approx w/w %

Hazard

CAS

EC / EINECS

Food Ingredient Based Attractant

None Identified

Cardboard Substrate

79%

None Identified

Hot melt pressure sensitive adhesive

20%

None Identified

4.0 FIRST AID MEASURES

CONTACT WITH SKIN

Wash hands thoroughly after handling traps. Prolonged contact with the adhesive may cause irritation. If irritation occurs seek medical advice.

CONTACT WITH EYES

Rinse eyes with copious amounts of water for at least 15 minutes. If irritation occurs seek medical advice.

INGESTION

Rinse out mouth with water. Do not induce vomiting. If feeling unwell after ingestion occurs seek medical advice.

INHALATION

If adverse effects are felt, remove patient to fresh air. If symptoms persist seek medical advice.

OTHER INFORMATION

If further safety data information is required, please contact P. F. Harris Manufacturing Company, LLC.

5.0 FIRE FIGHTING MEASURES

In case of fire, use water, CO

or dry powder. Combustion products include carbon oxides. Wear self contained breathing apparatus and protective

clothing.

6.0 ACCIDENTAL RELEASE MEASURES

In case of spillage, collect traps, seal in a suitable container and remove for disposal. Traps should be collected and disposed of in accordance with

local, state or Federal legislation. The use of gloves is recommended, but not essential. Avoid contamination of soil, water sources and sewers.

7.1 HANDLING

Do not open packaging until time of use. Do not eat, drink or smoke when handling the product. Wash hands thoroughly after handling.

7.2 STORAGE

Keep only in the original packaging in a cool, dry, well ventilated place. Store away from heat and out of direct sunlight.

8.0 EXPOSURE CONTROLS / PERSONAL PROTECTION

8.1 Exposure Limits

No exposure limits are defined.

Summary of content (2 pages)

PAGE 1
Material Data Safety Sheet Version No 1 Date 01/29/12 Reason for Revision First Issue 1.1 PRODUCT IDENTIFICATION: Harris Bed Bug Traps 1.2 PRODUCT USE: Insect Monitoring Trap 1.3 COMPANY: P. F. Harris Manufacturing Company, LLC, P. O. Box 1122 Alpharetta, GA 30009 1.4 EMERGENCY TELEPHONE: 800 637 0317 2.0 HAZARD IDENTIFICATION: None Identified The trap substrate contains no hazardous ingredients.
PAGE 2
8.2 Exposure Controls 8.2.1 Occupational Exposure Controls No special exposure controls are necessary. Under normal use, personal protection procedures are limited to normal personal and industrial hygiene practices. 8.2.2 Environmental Exposure Controls No special exposure controls are necessary. Environmental protection procedures are limited to normal domestic and industrial practices. Avoid contamination of soil, water sources and sewers. 9.