SDS

SDS – Harris Yellow Jacket, Wasp & Hornet Killer Page 3
SECTION 7. HANDLING AND STORAGE
HANDLING: Use this product only in a manner consistent with its labeling. Ensure adequate ventilation, especially in
confined areas. Keep away from heat, sparks, flame and other sources of ignition. Take precautionary measures against
static discharges. Use spark-proof tools and explosion proof equipment. All equipment used when handling the product
must be grounded. Do not apply around electrical equipment. Use with local exhaust ventilation. Use personal protective
equipment as required. Avoid contact with skin, eyes or clothing. Avoid breathing vapors or mists. Contents under pressure.
Do not puncture or incinerate cans. Do not stick pin or any other sharp object into opening on top of can.
STORAGE: Keep container closed in a dry and cool place. Do not expose to temperature exceeding 130°F. Keep in
properly labeled containers.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS: Safety showers. Eyewash Stations. Ventilation Systems.
Eye Protection: Recommended: Safety goggles
Skin Protection: Wear protective gloves and protective clothing.
Respiratory Protection: If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory
protection should be worn. Positive-pressure supplied air respirators may be required for high airborne contaminant
concentrations. Respiratory protections must be provided in accordance with current local regulations.
When using do not eat, drink or smoke. Regular cleaning of equipment, work area and clothing is recommended.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid - Aerosol
Appearance and Odor: Milky-white, characteristic/solvent odor
pH: 7.0 – 8.0 (on
non-volatiles)
Freezing Point: N/A
Boiling Point: N/A
Flash Point:
>200°F (93.3°C)
Evaporation Rate (water=
1): N/A
Upper/Lower Explosive limits: N/A
Vapor Pressure: N/A
Vapor Density (air=1) (20°C): N/A
Specific Gravity (Water=1): N/A
Solubility: partially miscible in water
Viscosity: 5.42 cPs @ 22°C (liquid fill – non-volatiles)
VOC Content: <1.0%
SECTION 10. STABILITY AND REACTIVITY
Chemical Stability: Stable under recommended storage conditions.
Conditions to Avoid: Extreme heat, sources of ignition (heat, flames and sparks)
Hazardous Decomposition Products: carbon oxides, (CO, CO2)
Incompatible Materials: strong acids, bases and oxidizing agents