Installation Instructions

Integration and Test, RBS 884 Pico (850 MHz and 1900 MHz)
Table 5-40. Integration Procedure to Assign Software Units to EMs (Continued)
Integration Procedure See Section
Define Equipment Positions (Optional) Section 9.4.3.5 on page
5-113
Define Remote Interface Equipment Types Section 9.4.3.6 on page
5-115
Define the Reverse Digital Path "DIP" Section 9.4.3.7 on page
5-116
Change Quality Supervision for Digital Path Section 9.4.3.8 on page
5-116
Initiate Quality Supervision for Digital Path Section 9.4.3.9 on page
5-116
Change Fault Supervision for Digital Path Section 9.4.3.10 on
page 5-116
Initiate Fault Supervision for Digital Path Section 9.4.3.11 on
page 5-117
Define Analog Voice Channel Data Section 9.4.3.12 on
page 5-117
Define Digital Voice Channel Data Section 9.4.3.13 on
page 5-118
Connect Channel Devices to Cell Section 9.4.3.15 on
page 5-119
Table 5-41 on page 5-96 lists the integration procedures for the configuration
of channel equipment.
Table 5-41. Integration Procedures for the Configuration of Channel Equipment
Integration Procedure See Section
Assign Speech Devices to TRXs ANA/DIG Section 9.4.4.1 on page
5-120
Set the Channel Equipment Capability Section 9.4.4.2 on page
5-122
Set the Device’s Channel Number and
Output Number
Section 9.4.4.3 on page
5-124
Assign Color Codes to Voice and Control Devices Section 9.4.4.4 on page
5-126
Link Channel Equipment with Channe
l
Function Units
Section 9.4.4.5 on page
5-127
5-96 1532-AE/LZB 119 3834 Uae Rev PA4 2001-04-04