Installation Instructions

Integration and Test, RBS 884 Pico (850 MHz and 1900 MHz)
7. Radio Head identification number for each TRX
Note: The Radio Head identification number is accessed through the
rotary switch on the RXLI board (Pico 850 MHz) or through
the alphanumeric display on the Radio Head customer interface
(Pico 1900 MHz) depending on the Radio Head product number.
8. TRX position
9. Global address of the Channel Equipment (CEQ)
10. Global address of Channel Function Unit (CFU)
– MCC (Mobile Analog Control Channel)
– MDCC (Mobile Digital Control Channel)
– MVC (Mobile Analog Voice Channel)
– MDVC (Mobile Digital Voice Channel)
– MLOC (Mobile Telephone Locating)
– MVER (Mobile Location Verification
Note: There are four TRX devices (two DTRXs) in each Radio Head.
For maximum backup capability, p
air the the functionality of
TRX1 with TRX3 and the functionality of TRX 2 with TRX4.
11. Global RILT addresses for the voice path to the TRX
12. Global address of the MBLT carrying the voice data
13. Global RILT addresses for the control signal path to the TRX
5.6.3 RBS 884 Pico Cell Configura
tions: Pico 850/1900 MHz
The following sample c
ell configurations are described in this section:
• Pico 850/1900 MHz Configurations
– A Digital-Only Cell with One Radio Head and One EMRPS
– A Digital-Only Cell with Two Collocated Radio Heads and
Two EMRPSs
• Pico 850 MHz Configurations
– An Analog Gateway Cell with One Radio Head and One EMRPS
– An Analog Gateway Cell with Two Radio Heads and One
EMRPS
5-34 1532-AE/LZB 119 3834 Uae Rev PA4 2001-04-04