Operator's Manual
Table Of Contents
- Front Cover
- Preface
- Table of Contents
- Welcome to the OpenSky Network
- Network Organization
- Getting Started
- Display Screen Functions
- How to set your Dwell Display Selection
- How to set your Operational Mode
- How to set your Active Profile
- How to set your Active Talkgroup
- How to Assign Priority to a Talkgroup
- How to Lock Out a Listen Group
- How to Unlock a Listen Group
- How to set your Scan Mode
- How to Change the Channel
- How to Enable or Disable Side Tones
- How to Change Screen Brightness
- Basic Radio Operations
- How to Turn Your Radio On
- How to Log On to the Network
- How to Read the Self-Test Results
- How to Turn Your Radio Off
- How to Change the Volume
- How to Take a Voice Call
- How to Make a Voice Call
- What the Beeping Means
- How to Place a Talkback Call
- How to Place an Emergency Call
- Advanced Radio Operations
- How to Re-Provision for an Emergency
- How to Place Talkaround Calls
- CH-103 Control Head
- VTac Vehicular Tactical Network
- Indexes and Tables
- I
- Index
CHAPTER 4—Display Panel Functions
40 M-803 Operator Manual Software Version OTP 5.07
Each of your other profiles, if any, is another group of
as many as 16 more user groups, one of which is
always the default Talkgroup. See the Getting Started
chapter for a full discussion of user groups, profiles,
listen groups, talkgroups and radio personality.
If you need access to groups not part of your active
profile, you can use the Menu Selector Buttons to
access the Profile menu and switch to any other pre-set
menu that is part of your radio personality.
You’ll have to be familiar enough with your profiles to
know which user groups are organized under each
name. Or, if just want to access a new talkgroup, you
can tune in the profile for which the talkgroup you
want to access is the default.
Check or Change Active Profile Status
If your Dwell Display is set to Profile, your screen will
display your active profile at all times. Otherwise, to
see your current selection, use the Menu Selector
keypad to access the Profile Menu.
To switch to a new active Profile during your work
shift, access the Profile Menu from the Menu Selector
keypad and make a new selection from the options.
Ø How to set your Active Profile
1.) Use the Up and Down buttons to cycle through
the Menu choices until ProfileMenu appears.
2.) Use the Left and Right buttons to cycle through
the Profile Menu options established by your
Network Administrator.
3.) Press the Select button to lock in your choice.
Your selected Dwell Display will appear as soon as the
M-803 accepts your choice.
It’s a good idea to
know the default
Talkgroup for each
Profile in your
Personality so you can
access it easily from
the Profile Menu.