Operator's Manual
Table Of Contents
- Front Cover
- Preface
- Table of Contents
- Welcome to the OpenSky Network
- Network Organization
- Getting Started
- Display Screen Functions
- How to set your Dwell Display Selection
- How to set your Operational Mode
- How to set your Active Profile
- How to set your Active Talkgroup
- How to Assign Priority to a Talkgroup
- How to Lock Out a Listen Group
- How to Unlock a Listen Group
- How to set your Scan Mode
- How to Change the Channel
- How to Enable or Disable Side Tones
- How to Change Screen Brightness
- Basic Radio Operations
- How to Turn Your Radio On
- How to Log On to the Network
- How to Read the Self-Test Results
- How to Turn Your Radio Off
- How to Change the Volume
- How to Take a Voice Call
- How to Make a Voice Call
- What the Beeping Means
- How to Place a Talkback Call
- How to Place an Emergency Call
- Advanced Radio Operations
- How to Re-Provision for an Emergency
- How to Place Talkaround Calls
- CH-103 Control Head
- VTac Vehicular Tactical Network
- Indexes and Tables
- I
- Index
CHAPTER 4—Display Panel Functions
54 M-803 Operator Manual Software Version OTP 5.07
2.) Use the Left button to change the display from
Nominal to Dimmer, or the Right button to
change the display to Brighter.
3.) Press the Select button to lock in your choice.
Your selected Dwell Display will appear as soon as the
M-803 accepts your choice. Your display screen should
be immediately brighter or dimmer as you requested.
Figure 22 Brightness Selection Menu
Brightness Selection Menu
Component Explanation
Brightness Menu.......
Used to change screen display one
increment brighter or dimmer than
the automatic (nominal) setting.
Menu Option.............
When you access the Menu, the
screen will indicate Nominal.
Change to Brighter or Dimmer,
and confirm your choice with the
Select button.
Menu
Option:
Display
Screen
Bri
g
htnes
s
Active Menu: Brightness Selection