Operator's Manual
Table Of Contents
- Front Cover
- Preface
- Table of Contents
- Welcome to the OpenSky Network
- Network Organization
- Getting Started
- Display Screen Functions
- How to set your Dwell Display Selection
- How to set your Operational Mode
- How to set your Active Profile
- How to set your Active Talkgroup
- How to Assign Priority to a Talkgroup
- How to Lock Out a Listen Group
- How to Unlock a Listen Group
- How to set your Scan Mode
- How to Change the Channel
- How to Enable or Disable Side Tones
- How to Change Screen Brightness
- Basic Radio Operations
- How to Turn Your Radio On
- How to Log On to the Network
- How to Read the Self-Test Results
- How to Turn Your Radio Off
- How to Change the Volume
- How to Take a Voice Call
- How to Make a Voice Call
- What the Beeping Means
- How to Place a Talkback Call
- How to Place an Emergency Call
- Advanced Radio Operations
- How to Re-Provision for an Emergency
- How to Place Talkaround Calls
- CH-103 Control Head
- VTac Vehicular Tactical Network
- Indexes and Tables
- I
- Index
Control Head Unit—CHAPTER 7
Software Version OTP 5.07 M-803 Operator Manual 75
• Complete common User Interface including
display screen, preset buttons, and menu/selector
keypad,
• Individual Audio controls,
• I/O port for wired Microphone/Speaker,
• Alternate interface site for Mobile Data Terminal
(limit one MDT per installation).
Figure 24 Dash-Mount with Control Heads
Sample Installation
Component Explanation
Duplexer ...................
M-803 supports optional duplexer
for Full Duplex operation.
MDT..........................
M-803 supports optional Mobile
Data Terminal for full-feature
graphics.
CH-103......................
Each Control Head supports
mic/speaker and an alternate site
for MDT installation.