Manualshelf

User Manual

ManualsBrandsHarris ManualsElectronicsOpenSky 800 MHz Base Station
11121314151617181920
MM102225V1, Rev. B
11
11. DO NOT operate equipment with damaged power cords or plugs - replace them
immediately.
12. DO NOT operate this product in an explosive atmosphere.
13. To reduce risk of electric shock, unplug unit from outlet before attempting any
maintenance or cleaning.
14. DO NOT operate this product with covers or panels removed. Refer all servicing to
qualified service personnel.
15. Use only fuses of the correct type, voltage rating and current rating as specified in the
parts list. Failure to do so can result in fire hazard.
16. GROUNDING AND AC POWER CORD CONNECTION - To reduce risk of
electrical shock use only a properly grounded outlet. The system components are
equipped with electric cords having an equipment grounding conductor and a
grounding plug. Be sure all outlets are properly installed and grounded in accordance
with all local codes and ordinances.
17. DANGER - Never alter the AC cord or plug. Plug into an outlet properly wired by a
qualified electrician. Improper connection or loss of ground connection can result in
risk of an electrical shock.
18. ELECTROSTATIC DISCHARGE SENSITIVE COMPONENTS - This station
contains CMOS and other circuit components, which may be damaged by
electrostatic discharge. Proper precaution must be taken when handling circuit
modules. As a minimum, grounded wrist straps should be used at all times when
handling circuit modules.
1.6. SAFETY SYMBOLS
WARNING
The WARNING symbol calls attention to a procedure, practice, or the like,
which, if not correctly performed or adhered to, could result in personal
injury. Do not proceed beyond a WARNING symbol until the conditions
identified are fully understood or met.
CAUTION
The CAUTION symbol calls attention to an operating procedure, practice, or
the like, which, if not performed correctly or adhered to, could result in
damage to the equipment or severely degrade the equipment performance.
NOTE
The NOTE symbol calls attention to supplemental information, which may
improve system performance or clarify a process or procedure.
The ESD symbol calls attention to procedures, practices, or the like, which
could expose equipment to the effects of Electro-Static Discharge. Proper
precautions must be taken to prevent ESD when handling circuit modules.