User Manual

MM102225V1, Rev. B
24
Figure 3-8: HPA RF Input Connection
Figure 3-9: DCX RF Output Connection
2. Racks that hold the HPA's have two large unconnected wire bundles covered with a
split loom. Pull these bundles to the adjacent rack, which contains the DCXs and the
Base Station Alarm Module
4
(see Figure 3-10: Wire Bundles with DCX and Base
Station Alarm Wiring).
4
The Base Station Alarm Module can be an ION Alarm manufactured by Sentinel or a NetGuardian Alarm, model D-PK-
NETGD-12053 manufactured by DPS Telecom.