Manualshelf

User Manual

ManualsBrandsHarris ManualsElectronicsOpenSky 800 MHz Base Station
21222324252627282930
MM102225V1, Rev. B
25
Figure 3-10: Wire Bundles with DCX and Base Station Alarm Wiring
(This figure is for the ION Alarm only. The DPS Alarm uses punchblock connections.)
3. Included in the wire bundle above, is a wiring harness with the female half of a
MATE-N-LOK® connector. Locate the male half (it connects to the harness that runs
to the Contact Closure Inputs plug on the Base Station Alarm Module) and connect
the MATE-N-LOK connectors (see Figure 3-11: DPS Alarm Punchblock
Connector).
Figure 3-11: DPS Alarm Punchblock Connector
ION Alarm
Bundle with
Lock-n-Mate
Connectors