User Manual

MM102225V1, Rev. B

STEPS ACTION MISCELLANEOUS

Disable all HPA’s except RF channel

under test. Select the RF channel under

test (C. U. T.) and different talk group

for both radios. Key the radio

transmitters simultaneously and verify

both stay on the same RF channel.

Repeat for all RF channels allocated to

site.

Enable all HPA’s. Select different RF

channels and the same talk group for

both radios. Key the primary radio

transmitter and verify the secondary

mobile radio trunks to the same RF

channel as the primary radio. Key the

secondary radio transmitter and verify it

stays on the same RF channel it just

trunked to. Repeat for all RF channels

allocated to site.

7.2 NETWORK CONNECTIVITY - BACKBONE

COMMUNICATIONS (REQUIRED)

Objective: These tests verify the quality of the T1 link feeding the site and connectivity

to the Regional Operations Center serving the base site under test.

Required Test Equipment:

• PC running a suitable console emulation program

• Cisco “Black” test cable

• Cisco RJ45 to DB-9 terminal adapter

STEPS ACTION MISCELLANEOUS

Check the front panel of the Cisco 3600

access server and observe whether the

READY LED’s are illuminated.

Check the front panel of the Cisco 3600

access server and observe whether the

ACTIVE LED’s are flashing.