User Manual

4. Press the PTT and

will reappear.

5. Release PTT when the transmission is complete.

LOCKING/UNLOCKING KEYPAD

1. Press  button.

2. Within 1 second, press the Option button on the side of the radio.

HIGH/LOW POWER ADJUSTMENT

Transmit power adjustment is possible if enabled through programming.

Within conventional systems, transmit power is adjustable on a per channel

basis. Within EDACS trunking systems, transmit power is adjustable on a per

system basis.

There are two ways to toggle between high and low power:

Using the Menu Button:

1. Press

.

2. Using the

 and  keys, scroll until the cursor (>) appears to the left

of “TX POWER” in the display.

3. Press

 again to toggle between High and Low power.

4. “POWER = HIGH” or “POWER = LOW” will appear momentarily on

the top line of the display.

Using the Pre-Programmed Option Button:

Press the Option button. “POWER = HIGH” or “POWER = LOW” will

appear momentarily on the top line of the display.

The Menu function accesses features that are not available directly from the

keypad. The order and actual menu items available is configurable through

programming. Upon radio power up, the menu item that is at the top of the

menu list will always be displayed first. Subsequent access to the menu

function will return the last menu item that was shown in the display and

cursor position.

1. To enter the menu mode, press

.

2. Upon entering the menu selection mode, Menu options will appear on the

display (see Figure 14).