User Manual

28
GROUP SELECTION
Method 1 (System Model)
1. Press
to access group list.
2. Press
to scroll through the list of groups or the numeric key
mapped to the desired group list.
3. Press
to select desired group. The radio will move to the selected
group.
Method 2
Rotate System/Group/Channel knob, or
If this knob is not programmed for groups, press the
buttons to
change groups. The display registers the new system name on line two.
CHANNEL SELECTION
Rotate System/Group/Channel knob, or
If this knob is not programmed for channels, press the
buttons to
change channels.
MODIFY SCAN LIST
System Model
1. Press
to toggle scan OFF and verify is not displayed.
2. Select group or channel.
3. Press
once to remove group or channel from list.
4. Press
once to add as a normal group or channel.
Press
twice to add as a Priority 2 group.
Press
three times to add as a Priority 1 group.
5. Press
to re-start scanning.
Scan Model
1. Press
to toggle scan OFF and verify is not displayed.
2. Select group or channel.
3. Press
once to remove group or channel from the list.
4. Press
once to add as a normal group or channel.