User Manual

If a group or channel is not programmed for Private Mode operation,

PVT DIS will be displayed if an attempt is made to enable private

transmit mode. It is not possible to operate on this group/channel in

Private Mode.

If the radio does not have the correct encryption key loaded, NO KEY#

will be displayed and the call will not be transmitted.

3. Continue with standard transmission procedures. A Private Mode access

tone will be heard when the PTT button is pressed.

Scanned Group Calls

Receiving a Scanned Group Call is the same as receiving a selected group

call. During the scan hang time, if the radio was programmed for autoselect, it

will transmit back in the same mode it received the call. For example, if a

clear group is entered in the scan list, it will only receive clear calls. If the

same group was available in private and entered in the scan list, it can receive

clear and private calls, provided autoselect was programmed in the radio. The

user can select transmitting on the scanned or selected group. If a group is

entered in the scan list more than once and in different modes (clear, digital,

private), only the first occurrence of the group will be used.

Table 6: Transmit/Receive Mode Compatibility for

Digital Voice Operation

GROUP/CHANNEL

PROGRAMMING

(TRANSMIT)

CLEAR

RECEIVE

DIGITAL

RECEIVE

PRIVATE

RECEIVE

CLEAR Yes No No

DIGITAL Yes Yes No

PRIVATE Yes No Yes*

*assumes the proper cryptographic key is loaded

NOTE

Conventional Digital or encrypted channels require Channel

Guard on the channel to operate correctly. The voice coding

technology embodied in this product is protected by

intellectual property rights including patent rights, copyrights,

and trade secrets of Digital Voice Systems, Inc. The user of

this technology is explicitly prohibited from attempting to de-

compile, reverse engineer, or to disassemble the Object Code,

or in any other way convert the Object Code into a human-

readable form.