User Manual

43
Receiving an Emergency Call
When receiving an Emergency Call on the selected group and system, an alert
beep is heard and is displayed. The message *RXEMER* flashes in the
display on line two until the emergency condition is cleared.
Declaring an Emergency Call
To send an emergency call to a selected system and group (or on an optionally
pre-programmed group), proceed as follows:
1. Press and hold the red EMERGENCY button that is on top of the radio in
front of the antenna for approximately one second (this time is
programmable and therefore could be longer or shorter; check with the
system administrator). The radio will transmit an emergency call request
with the radio ID until an emergency channel assignment is received.
2. When the working channel assignment is received, the radio sounds a
single beep indicating the radio has auto keyed (see Table 4) and is ready
for voice transmission. *TXEMER* flashes on line two in the display
until the emergency is cleared.
3. Press PTT and speak into the microphone in a normal voice.
and
momentarily turn ON.
4. Release PTT when the transmission is complete.
To clear the emergency first press and hold the CLEAR/MONITOR button.
While continuing to hold the CLEAR/MONITOR button, press the
EMERGENCY button. (This will work if the radio is programmed to clear
emergencies.)
INDIVIDUAL CALLS
Receiving and Responding to an Individual Call (Trunked Mode
Only)
When the radio receives an individual call (a call directed only to the user's
radio), it un-mutes on the assigned working channel and displays
. The first
line on the display shows the logical ID number of the unit sending the
message, or the associated name if the ID number is found in the individual
call list. The radio can be programmed to ring when an individual call is
received. If enabled, the ring begins five seconds after the caller un-keys and
will continue until the PTT button, the CLEAR/MONITOR button or the
individual call mode is entered.
NOTE
The volume of the ring is adjustable through the volume control
levels.