User's Manual

Advanced Radio Operations – Chapter 6
P800 User’s Manual 78
Troubleshooting
If your radio does not operate properly, check the chart
below for likely causes. For additional assistance,
contact a qualified service technician.
Symptom Cause Solution
Radio will not
turn on
Low battery. Install a fully charged
battery pack.
No audio
Speaker volume is muted. Increase the volume level.
Poor audio
You are in a poor coverage
area or not on the network
Move to a better coverage
area.
Poor audio
Antenna connection is
loose.
Reseat the antenna in the
top panel connector
Failed
Registration
Wrong User ID/ password
or ID not approved
Send to Network
Administrator for new
User ID and/or password.
Missed Call
Scanning not enabled Enable scan mode
Unable to
Respond to a
Call
Talkback scanning not
enabled
Enable talkback scan