SDS

SDS – Pruning Seal Page 1
SAFETY DATA SHEET
Pruning Seal
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Product Name: Pruning Seal
Product Code(s): PRUNE-13
Other means of
Identification:
Recommended Use: Horticultural/Agricultural Use – coating
Manufacturer/Marketer:
P.F. Harris Manufacturing Company, LLC
P.O. Box 1922
Cartersville, GA 30120
Email: [e-mail]
www.pfharris.com
Customer Service: 1-800-637-0317
Monday-Friday, 9am – 5pm EST
Emergency:
National Poison Control: 1-800-222-1222
24 hour Emergency Telephone: [phone]
SECTION 2. HAZARDS IDENTIFICATION
OSHA Regulatory Status:
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
HAZARDS CLASSIFICATION:
Skin Corrosion/Irritation – Category 2
Carcinogenicity – Category 1A
Reproductive Toxicity – Category 2
Flammable aerosol – Category 1
Gases under pressure – Liquefied gas
SIGNAL WORD: DANGER
GHS HAZARD PICTOGRAMS:
Hazard Statements: Extremely flammable aerosol. Causes skin irritation. May cause cancer. Suspected of damaging
fertility or the unborn child. Contains gas under pressure; may explode if heated. Harmful to aquatic life with long lasting
effects.
Precautionary Statements: Keep away from heat, sparks, flame and other sources of ignition. No smoking. Do not spray on
open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Wash face, hands and any
exposed skin thoroughly after handling. Wear protective gloves/clothing/eye protection/face protection. Use only outdoors or
in a well-ventilated area. Do not handle until all safety precautions have been read and understood. Use personal protective
equipment as required. Avoid release into the environment.