Operator's Manual

12
Option 1 Button
This button can be programmed with a programmable function. The default
function is "Monitor/Clear".
Option 2 Button
This button can be programmed with a programmable function. The default
function is "Disabled".
Option Status LEDs
The two Option Status LEDs (Light Emitting Diodes) indicate the state of
the radio. The upper LED indicates the state of function assigned to the
Option 1 button. The lower LED indicates the state of the function assigned
to the Option 2 button.
Option Button Functions
The following functions can be assigned to the Option 1 or Option 2 buttons.
NOTE
Press and hold the Option 1 or Option 2 buttons to execute the
programmed function.
Table 1: Programmed Functions States
Function
1 Short High Tone
Option Status LED
ON
2 Short High Tones
Option Status LED
OFF
Local/Distant Squelch Local Distant
Type 99 ON/OFF ON OFF
Home Channel Home Channel Selected Channel
Horn Alert ON/OFF ON OFF
Public Address ON/OFF ON OFF
External/Internal Speaker External Internal
Disabled
No function is assigned to the Option button. When pressed, the radio will
emit a Denied Alert Tone.