User Manual

19
DISPLAY
PANTHER 300M Display
Figure 2 - PANTHER 300M Display
The PANTHER 300M includes a dual two character 7-segment display,
two LEDs to indicate Option Function Status, and a tri-color LED to
indicate Transmit/Receive Status. The 7 Segment Displays are also used
to provide various radio status information and error status information.
The PANTHER 300M radio normally displays the
selected channel by displaying the selected channel
number in the two 7 Segment Displays. The
PANTHER 300M radio can not display the channel
name defined in the radio personality, only the
channel number.
Display Status And Error Codes
Mobile is in CopyCat Mode number.
Carrier Control Timer Timeout. The transmitter has
been disabled by the Carrier Control Timer function.
"CC" will be displayed and the carrier Control Alert
Tone will be sounded until PTT is released.
Empty Channel. The channel selector switch is either
on an invalid channel position or the current channel
position is not programmed. Verify the channel
selector switch is in its proper detent and that the
channel is properly programmed.
Busy/Tx LED
Dual 7 Segment
Displays
Option 1 LED
Option 2 LED
1 … 6
C
CC
EC