Installation Manual

21
Figure 8 –Mounting Bracket Installation
3. Place the radio into the mounting bracket and secure with the
four 3/8” Phillip’s screws supplied. The radio can be fastened in
any of three different positions: parallel to the mounting surface
or tilted slightly from the parallel position. (Refer to
Figure 9
.)
4. Connect antenna coaxial cable to antenna connector (TNC).
5. Insert power cable into power connector running from rear of
radio unit and push until the connectors snap together.
6. Recheck all connections and then reinsert fuse into the fuse
assembly on the power cable.