User Manual

23
NOTE
A special spacer may be required between the control unit
bracket and the motorcycle to raise the level of the control
unit bracket. This spacer, if needed, must be constructed
locally.
2. Mount the control unit and mic hanger to the mounting bracket.
After installing the control unit, do not make any cable connections until all
cables have been run and secured. Speaker and option connectors are shown
on the Interconnection Diagrams listed in the Table of Contents.
SPEAKER MOUNTING
Mount the speaker where the operator can hear it, and where it does not
interfere with the safe operation of the motorcycle. On some motorcycles,
the speaker can be attached to the windshield bracket using existing bolts to
secure the speaker mounting bracket (see Figure 10).