User Manual

26
Figure 10 - Typical Speaker Mounting
CABLE ROUTING
Power and Control Cables
Cable routing consists of planning and routing the cable runs between the
radio, control unit, and battery. The cables should be routed away from
exhaust pipes, mufflers, and moving parts, or where mechanical damage
may result. Secure all cables with black cable ties to provide a clean
installation.
The power and control cables, red and black, exit the radio case assembly
through the square hole in the front of the box and are routed to the area
beneath the saddle. The fused power cables (19B802622P2 or
19B802554P25) from the radio terminate here and are connected to the
battery. The control cable is routed through the triangular frame assembly to
the rear of the control unit.
Option Cable
The option cable is routed from the option connector on the rear of the
control unit CG/PTT disable switch mounted on the left handlebar.