User's Manual

18
Optional Keycap Configuration
The optional keycap package for the System radio includes sixty (60)
additional keycaps (shown in the Key Descriptions section), which can be
placed on any key location desired. Keep in mind, the keycap represents the
primary function programmed for that key location.
Key Descriptions
MODE This key is used to enter the Conventional System selection
mode.
HOME This key returns the radio to the Home System/Group where it
is programmed.
CHN This key is used to enter the Channel select mode.
AUX1 & 2
These keys are used to control output 1 or 2. Their definition
is PC programmable.
S This key is used to enter the System select mode.
G This key is used to enter the Group select mode.
o
O
This key function is used to toggle a PC programmable
feature ON and OFF.
DEL Secondary function - used to delete a digit during numeric
entry (see SELECTION MODE RULES).
M Primary function - accesses the menu list. This is a list of
additional features that are not available directly from the
keypad. See MENU section for details.
SELECT Secondary function - activates a selected item within a list.
After the menus list is accessed, select a menu item from the
list via RAMP controls,
, or ., and activate it with this
key. Once activated, MENU continues its secondary function
for activating a selected parameter setting until the radio
returns to its normal receive state. This is similar to an enter
key.
S The Status key permits the transmission of a pre-programmed
status message to an EDACS site.
N The Message key permits the transmission of a pre-
programmed message to an EDACS site.