User's Manual

21
DISPLAY
The radio's display is shown in Figure 6. The two character lines are used to
display system, group and channel names and also operational messages. Each
line contains eight alphanumeric character blocks. See Figure 2 for a typical
display.
Figure 6 – M7100
IP
Series Mobile Radio Display
RADIO STATUS ICONS
Status icons are indicators that show the various operating characteristics of
the radio. The icons appear on the first line of the display.
• indicates selected group or channel is in scan list.
• indicates selected group or channel is programmed as
Priority 1 in scan list.
• indicates selected group or channel is programmed as
Priority 2 in scan list.
• indicates conventional channel enabled with Channel
Guard function.
• indicates the EDACS system is in Failsoft™ mode (if
enabled through programming).
• indicates Type 99 Decode is enabled on a
conventional channel.