User's Manual

23
MESSAGE NAME DESCRIPTION
SYSC ON
System Scan Features
ON
Trunked mode only. Indicates the System Scan
features are enabled.
SYSC OFF
System Scan Features
OFF
Trunked mode only. Indicates the System Scan
features are disabled.
T99 ON
Type 99 Decode ON Conventional mode only. Indicates the Type 99
Decode feature is enabled.
T99 OFF
Type 99 Decode OFF Conventional mode only. Indicates the Type 99
Decode feature is disabled.
PA ON
Public Address ON Indicates that the public address function of the
radio is enabled.
PA OFF
Public Address OFF Momentary (2 seconds) indicates that public
address function of the radio was disabled.
ALRM ON
External Alarm Enabled Indicates that the external alarm function of the
radio is enabled.
ALRM OFF
External Alarm
Disabled
Momentary (2 seconds) indicates that the
external alarm function of the radio was disabled.
PVT DIS
Private Mode Disabled Indicates that private mode is disabled or no
encryption key has been programmed for the
selected group/channel or special call.
FRCD PVT
Forced Private
Operation
Indicates that forced private operation has been
pre-programmed into radio.
NO KEY #
Encryption Key
Missing
Flashing indicator indicates that no encryption
key or an incorrect encryption key is
programmed into the radio.
BCKL=1-6
Backlight Indicates the display intensity and keypad
backlight level.
GR
Group ID Indicates that the call is a group call and is
followed by the GID of the caller (trunked mode
only).
ID
Individual ID Indicates the call is an individual call and the ID
number of the caller, example "ID 2725"
(trunked mode only).
WHC=1
Who Has Called This display indicates the number from the Who
Has Called list. Individual calls received but not
responded to are stored in a Who Has Called list.
This list is accessible by pressing the # key and
then the INDV key after the Individual call has
timed out or the Clear button is pressed. This
display is on line 2 and the LID of the caller is
displayed on the top line. Currently the list is not
implemented and the display will always be
WHC=1.
PHONE
Phone Call Displayed when a phone call is received from the
site. It is displayed in line 1 of the display. Line 2
of the display will contain the display *INDV*
when line 1 contains this message. The radio
interprets a received phone call as an individual
call.