User's Manual

24
MESSAGE NAME DESCRIPTION
CONV FS
Conventional Failsoft Displayed when a failure of the EDACS system
occurs. All communication will be in
conventional mode (trunked mode only).
MENU
Displayed when the menu key is pressed and
remains displayed in line 1 until a menu item is
selected.
SYS=1-64
System = 1 - 64 The system number for the current base station of
the system displayed in line 1. It is displayed in
line 2 of the display. Press the system key to
obtain this display.
GRP=1-64
Group = 1 - 64 The group number of the group displayed in line
2 of display. It is displayed in line 1 of the
display. Press the group key to obtain this
display. There are up to 48 groups available (i.e.
3 banks of 16). The maximum number of groups
programmed in a radio is determined by the
personality.
INDV=1-99
Individual = 1 - 99 Indicates which item in the individual call list is
being displayed. It is displayed in line 2 of the
display. The name or ID of the item in the list is
displayed in line 1 of the display.
PHN=1-99
Phone = 1 - 99 Indicates which item in the phone list is being
displayed. It is displayed in line 2 of the display.
Line 1 of the display will be the last 3 characters
of the list item contents.
SEL PHN
Select Phone After pressing the PHN key, selecting an entry
from the phone list by typing the entry number
will display this message on Line 1.
SEL INDV
Select Individual ID Displayed on line 1 when an entry from the
individual ID list is selected after pressing the
INDV key. The entry is a number between 1 and
32 inclusive (trunked mode only).
SYS ALL
System All Call Displayed on line 1 to indicate a system all-call
has been received (trunked mode only).
Ggg-v.vv
Code Group and
Revision Number
This is code group and revision number that is
displayed in line 2 when the menu item
"REVISION" is selected. The `gg' is the group
number of the software. The first `v' is the
hardware version and `vv' is the revision of the
software.
*PHONE*
Phone Call Displayed when an initiated phone call is in
progress. This is displayed on line 2 of the
display.
DUAL
Dual Control Operation Displayed on an idle control unit when
configured as dual control operation.
NO ENTRY
Indicates that there is no data stored in one of the
programmable items in either the phone list or
individual call list. The user programmable items
are items 1 through 10 in each list.
INV SYS
Invalid System Displayed when the current system is an invalid
type.