User's Manual

25
MESSAGE NAME DESCRIPTION
CHN=1-99
Channel = 1 - 99 Displayed on line 1 of the display. This is a
conventional channel index displayed when the
group key is depressed.
FIX LIST
Fixed List The Priority scan list is fixed and cannot be
changed using the add or delete keys.
FIXED P1
Fixed Priority 1 The Priority 1 scan channel is fixed and cannot
be changed using the add or delete keys.
(c) 2003
Displayed in line 2 when the message "M/A-
COM" is displayed in line 1 while displaying
different items under the menu when
‘REVISION’ is selected by the operator.
EM
Emergency Indicates an emergency has been declared by the
LID that follows the display, ‘EM.’ An example
of this is “EM 01201.”
*INDV*
Individual Call Displayed in line 2 of the display when an
individual call is in progress (trunked and T99
modes only).
*GROUP*
Group Call Indicates a group call is in progress and is
displayed on line 1 of the display (trunked and
T99 modes only).
SPKR ON
External Speaker ON Displayed when the external speaker is enabled.
SPKR OFF
External Speaker OFF Displayed when the external speaker is disabled.
BANK=1-8
The bank of keys that are going to be loaded
when the keyloader loads encryption keys. This
is only valid for radios that support VGS, VGE,
or DES encryption. It is displayed on line 2 of the
display when the encryption keyloader is
connected.
REGR_0x
Dynamic Regroup Indicates which group in the dynamic regroup
operation has been enabled, where "x" is a digit
of 1 to 8 (trunked mode only).
KEY LOAD
Displayed on line 1 of the display when the
encryption keyloader is connected.
KEY ZERO
Displayed on line 2 of the display when the reset
and option buttons are pressed simultaneously for
approximately two seconds. The encryption keys
are zeroed.
SYS KEY
System Key Displayed on line 1 of the display in the display
key mode of the menu. It is followed in the
second line with a key number `KEY = <1..7>'.
GRP KEY
Group Key Displayed on line 1 of the display in the display
key mode of the menu for trunked systems only.
It is followed in the second line with a key
number ‘KEY = <1..7>.’
CHN KEY
Channel Key Displayed on line 1 of the display in the display
key mode of the menu for conventional systems
only. It is followed in the second line with a key
number ‘KEY = <1..7>.’