User's Manual

entered on line 2, but SEL has not been pressed), the entry on line 2 will be

disregarded and the previous selection will remain active. If the time-out

activates while an entry is pending, the entry on line 2 will be selected if it is

within the valid range; if it is out of range, the entry on line 2 will be

disregarded and the previous selection will remain active.

NOTE

While in system, group or channel selection mode, the radio

continues to receive calls normally and continues scanning, if it

is enabled. If a call is received during the selection mode

process the radio will return to the normal receive mode

display. Continuing with the selection process will return the

display to the same point in the selection process if the

selection mode time out has not yet expired. Any press of the

PTT button during the selection mode process will initiate

transmission and exit the selection mode.

The menu function accesses features that are not available directly from the

keypad. The order and specific number of menu items available is

configurable through programming. Upon radio power up, the menu item at

the beginning of the menu list will always be displayed first. Subsequent

access to the menu function will return the last menu item that was shown in

the display. To enter the menu mode, press

m. The RAMP controls, , and

., the SEL and the c buttons are used during the selection process. All of

the selection mode rules previously detailed apply to the menu item selection

process with the exception of direct access. The radio will continue to receive

and transmit normally while in the menu function.

A new item is displayed by using the RAMP controls,

, and ., to scroll

through the list in increasing and decreasing order. The displayed menu item

is made active by pressing SEL.

After entering the menu selection mode, the following generic display format

will appear.

M E N U

Y Y Y Y Y Y Y Y

Line 1 indicates the radio is in the menu selection mode. Line 2 indicates the

menu item (YYYYYYYY) that is to be viewed or changed (some menu items

provide radio information and do not have changeable parameters).

An example of the menu item selection process and menu item parameter

change is detailed below for the backlight menu item.

PRESS:

The menu mode is entered.