User's Manual

2. When a group on the scan list receives a channel assignment, the radio

unmutes on the assigned channel, the BSY indicator comes on and the

received scan group is displayed.

• The radio will continue scanning if a new group is selected when

scan is on.

• Pressing the PTT button when scan is on will cause the radio to

transmit on the displayed group or to the currently selected group

depending on programming.

• Pressing < when scan is on will cause the radio to recall the scanned

group that was last received. This group is recalled for a period equal

to the scan hang time.

Priority Group Scanning

When scan is enabled and the Priority 1 and Priority 2 groups have been

identified, the radio will listen to calls on those groups and the selected group.

While receiving a scanned group call, the radio will continue to monitor the

selected Priority 1 and Priority 2 groups and will drop the call if the selected

group or other higher priority call becomes active. During a Priority 2 call the

radio will continue to monitor for a Priority 1 group call.

The radio will monitor for Agency and Fleet calls that correspond to the

Agency and Fleet associated with the Priority 1 and Priority 2 groups. Priority

Agency and Fleet calls will be indicated by displaying AGENCY or FLEET

on the System line of the display and associated Priority 1 or 2 group on the

Group line of the display.

Turning Scan Off

Toggle scan operation off by pressing k. The radio will resume operation

on the selected group.

INDIVIDUAL CALLS

Receiving and Responding to an Individual Call

When the radio receives an individual call (a call directed only to the user's

radio), it unmutes on the assigned working channel and turns on the BSY

indicator. Line 1 shows “ID” followed by the logical ID number of the radio

sending the message, or the associated name if the ID number is found in the

individual call list. The individual call indicator will display *INDV* on line 2.

The radio can be programmed to ring when an individual call is received. If

enabled, the ring begins five seconds after the caller unkeys and will continue

until the PTT button, the

c button, or i is pressed.