User's Manual

NOTE

Hookswitch functions the same as c key in I-CALL,

phone call, and menu modes.

If a response is made to the call prior to the programmed call-back time-out,

the call will automatically be directed to the originating unit. If a response is

not made before the call-back time-out, the radio will return to normal receive

mode, but * WHC * will be displayed. If the caller's ID is not received,

UNKNOWN will display for the duration of the call and there will be no call-

back hangtime.

To respond after the call-back time-out, press the

i key. The radio's display

will show the callers ID on the first line and WHCI=1 on the second line.

Pressing the PTT button at this point will initiate an individual call back to the

original caller. (If the last call was a group call, the display will show

WHCG=1. Pressing the PTT button will place the call as an individual call.)

The radio stores the IDs of the last 10 callers in the Calls Received List as

shown. Individual calls are stored in the top half of the list (1-10) and group

calls are stored in the bottom half of the list (1-10). The most recent call is

stored in position 1, the second most recent call is stored in position 2, etc.

To access the list, press the

i key twice. Use the , or . keys to scroll

through the list. Pressing the

m key will display the time elapsed since the

call was received.

Call Storage Lists

There are two lists available for call storage in the radio, the calls received list

(1-10) and the personality list (1-99 as defined by the user). When the

individual call mode is entered by pressing

i, the calls received list is

available. The user can toggle to the personality list by selecting any key other

than d (0) or toggle between the two lists by pressing the i key. If wrap is

enabled, the calls received list wraps on itself and not into the other list.