Rear Cover of Manual Front Cover of Manual HDP150 DMR Portable Radio Operator’s Manual 14222-1150-2000 Rev. A, Jul/12 Public Safety and Professional Communications 221 Jefferson Ridge Parkway | Lynchburg, VA USA 24501 www.pspc.harris.
MANUAL REVISION HISTORY REV. DATE REASON FOR CHANGE – Nov/11 Initial release. A Jul/12 Revised attachment procedure for accessory/programming cable and accessory model numbers. Added Equipment and Rechargeable Battery Warranty. Harris Corporation, Public Safety and Professional Communications (PSPC) Business continually evaluates its technical publications for completeness, technical accuracy, and organization.
NOTICE! Information and descriptions contained herein are the property of Harris Corporation. Such information and descriptions may not be copied or reproduced by any means, or disseminated or distributed without the express prior written permission of Harris Corporation, PSPC Business, 221 Jefferson Ridge Parkway, Lynchburg, VA 24501.
TABLE OF CONTENTS Section Page SYMBOLS USED IN THIS MANUAL .................................................................................................................. 1 CAUTION AND NOTE SYMBOLS ................................................................................................................. 1 SYMBOLS FOR ANALOG AND DIGITAL CHANNEL FEATURES/FUNCTIONS ....................................1 REGULATORY INFORMATION ..........................................................................
TABLE OF CONTENTS Section Page BASIC OPERATIONS ......................................................................................................................................... 18 TURNING THE RADIO ON AND OFF ........................................................................................................ 18 ADJUSTING THE VOLUME ........................................................................................................................ 18 SELECTING A ZONE ......................
TABLE OF CONTENTS Section Page Contact List ..............................................................................................................................................30 New Contact ............................................................................................................................................. 31 Manual Dial ..............................................................................................................................................
TABLE OF CONTENTS Section Page Pausing Scan ................................................................................................................................... 43 Nuisance Temporary Delete .................................................................................................................... 43 EMERGENCY COMMUNICATIONS ............................................................................................................... 44 GENERAL INFORMATION .........................
TABLE OF CONTENTS Section Page MISCELLANEOUS FEATURES ........................................................................................................................ 56 CHANNEL BUSY LOCKOUT ....................................................................................................................... 56 TIME-OUT TIMER (TOT).............................................................................................................................. 56 PSEUDO TRUNKING ......................
TABLE OF CONTENTS Section Page RADIO CLEANING ....................................................................................................................................... 65 MODEL NUMBERS ............................................................................................................................................. 66 RADIO PACKAGES ...................................................................................................................................... 66 ANTENNAS ....
SYMBOLS USED IN THIS MANUAL The following tables list symbols used in this manual. These symbols do not appear in the radio’s display. CAUTION AND NOTE SYMBOLS SYMBOL DESCRIPTION WARNING The WARNING symbol calls attention to a procedure, practice, or the like, which, if not correctly performed or adhered to, could result in personal injury. Do not proceed beyond a WARNING symbol until the conditions identified are fully understood or met.
REGULATORY INFORMATION PRODUCT SAFETY BOOKLET WARNING Before operating the HDP150 portable radio, read the safety and RF exposure guidelines contained in Product Safety Booklet included with the radio. RF EXPOSURE GUIDELINES WARNING The HDP150 portable radio generates RF electromagnetic energy during transmit mode.
REGULATORY INFORMATION CAUTION To ensure exposure to RF electromagnetic energy is within the FCC allowable limits for occupational use, always adhere to the following guidelines: • DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause the FCC RF exposure limits to be exceeded. A proper antenna is the antenna supplied with this radio by Harris or an antenna specifically authorized by Harris for use with this radio.
REGULATORY INFORMATION operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. FCC Part 15 Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
CHECKING ITEMS IN THE PACKAGE Carefully unpack and check that all items listed below are received. If any item is missing or damaged, please immediately contact your dealer. Antenna Operator’s Manual, Product Safety Booklet, Quick Guide Power Adapter Battery Battery Charger Belt Clip Wrist Strap Radio NOTE The antenna may vary with different frequency bands. The frequency band is marked on the label of antenna. If not, refer to the label on the radio unit for frequency band information.
RADIO OVERVIEW RADIO CONTROLS, INDICATORS, AND OTHER ITEMS ITEM NAME ITEM NAME 1 Side Key 1 (SK1) 12 LED Indicator 2 PTT Key 13 Antenna 3 Side Key 2 (SK2) 14 On/Off/Volume Control Knob 4 Top Key (TK) 15 Accessory Jack 5 Channel Selector Knob 16 Back Key 6 Microphone 17 Programmable Key (Right) 7 Liquid Crystal Display (LCD) 18 Up Key 8 Select/Menu Key 19 Down Key 9 Programmable Key (Left) 20 Battery Latch 10 Speaker 21 Belt Clip 11 Keypad 22 Battery 6
RADIO OVERVIEW PROGRAMMABLE SHORTCUT KEYS For enhanced convenience, you may request your dealer pre-program keys SK1, SK2, TK, shortcuts to any of the functions listed in this table: NO. SHORTCUT NAME 1 2 3 4 5 6 7 8 9 Zone Up Zone Down Keypad Lock Contact List Message Call Logs Adjust Power Level Talk-Around Monitor Monitor Momentary 10 11 12 13 14 Squelch Off Squelch Off Momentary Home Screen Scan and as SHORTCUT KEY FUNCTION Change to another zone. See pages 18 or 36. Lock or unlock the keypad.
RADIO OVERVIEW NO. SHORTCUT NAME SHORTCUT KEY FUNCTION 15 Nuisance Temporary Delete 16 Emergency On 17 Emergency Off 18 Lone Worker Adjust Squelch Level Temporarily skip unwanted channel activity during scanning. See page 43. Turn on the emergency mode and transmit emergency call/signaling. See page 44. Turn off the emergency call/signaling, exiting emergency mode. See page 44. Toggle the Lone Worker feature on and off. See page 50.
RADIO OVERVIEW NO. SHORTCUT NAME 26 27 Phone List Roam NOTE SHORTCUT KEY FUNCTION To access the Phone List menu quickly. See pages 27 or 34. To enable and disable the Roam feature. See page 58. Long and short presses of a key can be programmed with different functions by your dealer. The Top Key (TK) is programmed as the emergency key by default. It may be reprogrammed by your dealer. Publication 14222-1150-2000, Rev.
BEFORE USING THE RADIO CHARGING THE BATTERY Follow this procedure to charge the radio’s battery: 1. Connect the AC power adapter to an AC power source. See arrow . 2. Plug the small plug of the power adapter into the jack at the rear of the charger. See arrow . Place the radio with the battery attached, or just the battery alone, into the slot in the top of the charger. See arrow . Refer to the following table for charge status, as indicated by the charger’s status indicator. 3. 4.
BEFORE USING THE RADIO ASSEMBLY AND DISASSEMBLY Remove Attaching and Removing the Antenna Attach To attach the antenna to the radio, place its base into the antenna jack on the top of the radio and turn the antenna in a clockwise direction. To remove the antenna from the radio, simply turn the antenna in a counter-clockwise direction until it is free from the radio. Attaching the Battery To attach the battery to the radio: 1.
BEFORE USING THE RADIO Attaching the Belt Clip To attach the belt clip to the radio: 1. Remove the two (2) screws on the rear of the radio. 2. As illustrated, align the screw holes on the belt clip with those on the radio and re-install the two screws into the holes. 3. Using a small screwdriver, tighten the two screws securely. Do not over-tighten them.
BEFORE USING THE RADIO CORRECT ALIGNMENT CAUTION INCORRECT ALIGNMENT INCORRECT ALIGNMENT When an external accessory is attached to the radio’s accessory jack, waterproof performance of the radio may be affected. Removing an Accessory/Programming Cable To remove a cable from the radio’s accessory jack, simply loosen its screw and detach the cable from the jack. Publication 14222-1150-2000, Rev.
RADIO STATUS INDICATORS OPERATIONAL MODE AND STATUS ICONS THE DISPLAY The radio has two (2) operational mode icons and multiple status icons that appear in its display. These icons are illustrated and described in the following table. ICON NAME ICON DESCRIPTION Direct Mode DM This operational mode icon indicates the radio is operating in direct mode. In this mode, radios communicate with each other directly. This mode is also referred to as “talk around.
RADIO STATUS INDICATORS ICON NAME RSSI Icons ICON DESCRIPTION This RSSI icon indicates no radio signal is being received. RSSI icons appear in the upper left corner of the display. RSSI stands for Received-Signal Strength Indication. More bars on an RSSI icon indicate better signal strength. Transmit (Tx) Power Level Icons Low transmit power for the selected channel. High transmit power for the selected channel. New message/unread message. Message Icons InBox is full. Scanning.
RADIO STATUS INDICATORS ICON NAME ICON DESCRIPTION The GPS feature is active and valid GPS data is being received. GPS Icons The GPS feature is active but no valid GPS data is being received. Scrambler/Encrypt Icon Missed Call Icon DTMF Keypad Icon Roam Icon 16 The Scrambler/Encrypt feature is enabled/active. A call has been missed. Dual-Tone Multi-Frequency (DTMF) keypad entry mode is enabled/on, so numbers can be entered via the radio’s keypad. The radio is roaming.
RADIO STATUS INDICATORS LED INDICATOR A light-emitting diode (LED) type status indicator is located on the top of the radio, near the On/Off/Volume Control Knob. This indicator can be quickly viewed to determine the basic operational status of the radio. Each status indication is described in the table at the right. LED INDICATOR RADIO STATUS Flashing Green Powering on Glowing Red Glowing Green Flashing Orange Slowly Transmitting Receiving (approximately once every 2 sec.
BASIC OPERATIONS TURNING THE RADIO ON AND OFF To turn on the radio, rotate its On/Off Volume Control knob clockwise out of the detent position. A click will be sensed. The radio responds by displaying its power-up screen and its LED status indicator flashes green. This knob is item 13 on page 6. To turn the radio off, rotate this knob fully counter-clockwise until the detent click is sensed.
BASIC OPERATIONS SELECTING A CHANNEL The radio’s Channel Selector knob is located on the top of the radio. It is item 5 on page 6. Rotate this knob to select the desired channel within the zone. The name of the selected channel appears in the display. This knob has 16 positions, for a total of 16 channels per zone. Some knob positions may not be programmed with a channel.
BASIC OPERATIONS NOTE When the Keypad Auto Lock feature is enabled, the keypad will automatically lock if no operation is made within the pre-programmed time period. The Keypad Auto Lock feature can be disabled via the Keypad Lock menu. HOME SCREEN The home screen is the default operating screen. It indicates the name of the selected zone, the name of the selected channel, battery strength, and other parameters of the selected channel (via icons) such as if the channel is a repeater vs.
BASIC OPERATIONS Transmitting a Private Call to the Preset Contact While in the home screen, hold down the radio’s PTT key to transmit a private call to the Private Call contact preset for the currently selected channel. Release the PTT key to stop transmitting, and listen for a reply. See Receiving and Responding to a Private Call for additional information. NOTE Each digital channel may be pre-programmed with a preset contact by your dealer.
BASIC OPERATIONS NOTE NOTE If the radio is programmed for Private Call Manual Dial and Group Call Manual Dial, switch between these by pressing the key. The appropriate ID is displayed. If the radio is programmed with the Default Numeric Key Selection enabled, you can enter a Private Call number in the home screen using the keypad, and then hold down the PTT key to transmit the Private Call. However, if the DTMF keypad is enabled, the number entered in the home screen is a phone number.
BASIC OPERATIONS GROUP CALLS A group call is a call initiated by a radio user to a group of radio users. Transmitting a Group Call When transmitting a group call, the icon appears in the display. A group call can be transmitted using either method described in the following subsections. NOTE When transmitting (i.e., PTT key depressed), hold the front of the radio between 1 to 2 inches from your mouth and speak into the microphone at a normal voice level.
BASIC OPERATIONS 4. 5. Hold down the PTT key to transmit a group call to the selected contact, and speak into the microphone at a normal voice level. Release the PTT key to stop transmitting, and listen for a reply. Transmitting a Group Call via Manual Input 1. While in the home screen, press the Menu key. 2. Select Contact > Manual Dial. 3. Enter the Group Call contact desired for calling via the keypad. 4.
BASIC OPERATIONS ALL CALLS An all call is a call initiated by a radio user to all radio users on the channel. Transmitting an All Call All calls can be transmitted to the preset contact or to a contact on the Contact list. Methods for transmitting an all call are the same as those described for Transmitting a Group Call on page 23. When transmitting an all call, the icon appears in the display. All calls can only be transmitted if enabled by your dealer via radio pre-programming.
BASIC OPERATIONS CALLS ON ANALOG CHANNELS Transmitting a Call on an Analog Channel 1. 2. 3. 4. If not already, select the desired analog channel. Listen for a clear channel. In other words, if another person is using the channel, wait for them to finish transmitting/speaking. If pre-programmed, a monitor or squelch off shortcut key should be used to verify the channel is clear. See the following sections for additional information on these functions.
BASIC OPERATIONS Squelch Off Squelch Off is an analog channel function that, when enabled, keeps the receiver unsquelched (i.e., not muted) even when there is no signal on the selected channel. When enabled, the icon appears in the top of the display and call audio on the channel (or receiver noise) is routed to the radio’s speaker. To toggle squelch between enabled and disabled, press the pre-configured Squelch Off shortcut key.
BASIC OPERATIONS 3. B. Enter the phone system’s access code via the radio’s keypad and then press the PTT key. The radio beeps and displays the dialing information. When the phone system is accessed successfully, the radio goes to the DTMF keypad mode again. Dial the desired phone number using one of the following methods: • Live Dial — Hold down the PTT key and enter the phone number via the radio’s keypad. Release the PTT key after the complete phone number has been entered.
BASIC OPERATIONS BATTERY STRENGTH INDICATOR If the Battery Strength Indicator shortcut key is pre-programmed, this function can be used to quickly check the remaining battery strength via the LED indicator on the top of the radio. This may be beneficial during certain ambient light conditions, or when the respective icons in the radio’s display cannot be easily viewed. Simply press and hold this preprogrammed shortcut key and view the LED indicator on the top of the radio. Publication 14222-1150-2000, Rev.
MENU NAVIGATION MAIN MENU The radio’s main menu structure is shown in the following diagram. To access the main menu, press the Menu key on the home screen. Each menu is described in the subsections that follow. Main Menu Contact Message Call Logs Phone Roaming Scan Zone Settings Accessories CONTACT MENU To access the Contact menu, first select a digital channel (if not already), then press the Menu key in the home screen and select Contact.
MENU NAVIGATION Deleting a Contact — Use this to delete a private call contact. However, when there is only one entry left in the list, it cannot be deleted. In addition, the private call contact preset on the currently used channel cannot be deleted. New Contact To add a private call contact to the Contact list, select New Contact in the Contact menu. The number and alias of each contact must be unique, and the available number range is 1 to 16776415.
MENU NAVIGATION MESSAGE MENU To access the Message menu, first select a digital channel (if not already), then press the Menu key in the home screen and select Message. Alternately, access this menu by pressing the respective pre-programmed shortcut key while on a digital channel. The Message menu displays. This menu supports the text messaging feature of the radio: New Msg Select New Msg to create a new text message and send it to an individual (via private call) or to a talk group.
MENU NAVIGATION For each message, you can choose to perform any of these operations: Resend, Forward, View Details, and Delete. To delete all messages in the OutBox, press the Menu key in the home screen and select Message > OutBox > Delete All. Drafts Drafts can save up to 20 draft messages. When full, the earliest message will be automatically overwritten by the last one entered. For each draft message, you can choose to perform any of these operations: Send, Save, and Delete.
MENU NAVIGATION PHONE MENU This menu supports telephone calls, as described in the section beginning on page 27. To access the Phone menu (if programmed), press the Menu key in the home screen and select Phone. Phone List Select Phone List to view and use stored phone numbers. Alternately, if programmed by your radio dealer, press the programmed Phone List shortcut key to quickly access this list.
MENU NAVIGATION SCAN MENU To access the Scan menu, press the Menu key in the home screen and then select Scan: Scan On/Off The Scan feature allows you to listen to communication activities on other channels. Select Scan On/Off on this menu to toggle scan operation on and off. When scan is off, the radio does not scan channels on the list; it simply remains on the selected channel. When scan is on, the radio scans channels according to the scan list set for the channel on which scanning starts.
MENU NAVIGATION ZONE MENU The radio supports up to 64 zones. Each zone is pre-programmed into the radio. To access the Zone menu, press the Menu key in the home screen, select Zone, and then use the Up/Down keys to select the desired zone from the menu. SETTINGS MENU Using the Settings menu, radio settings can be customized by changing various parameters according to actual user/operator needs and preferences. Also, this menu can be used to display basic device information about the radio.
MENU NAVIGATION The power level should be individually set for each channel. NOTE Squelch — Select this to set an appropriate receiver squelch level via the Adjust Squelch Level submenu. Alternatively, press the assigned shortcut key to access the Adjust Squelch Level sub-menu. There are three (3) levels available: Tight, Normal, and Open. The default squelch level is Normal. It is often used in a low radio frequency noise environment.
MENU NAVIGATION Language — Use this to set the language of the radio’s menus. Backlight — Use this to set backlight to either on, off, or timer. When set to timer, the backlight turns off a pre-programmed time period after user key presses end. The timer is pre-programmable by your dealer with a time period of between 5 and 60 seconds. Brightness — Use this to set display brightness. Raise or lower it using the Up/Down key. Keypad Lock — Use to set whether to enable this function.
MENU NAVIGATION Low Battery: Use to set whether or not a tone is generated when the radio’s battery needs charging. Channel Notify: Use to set whether or not the number of the newly selected channel will be announced from the radio’s speaker in a synthesized voice. See page 19 for additional information. Signaling Side: Use to set whether or not the radio will sound continuous tone during a signaling transmission. This feature is available for calls for HDC1200/5-tone/2-tone systems.
MENU NAVIGATION ACCESSORIES MENU Use the Accessories menu to view, change, and send Global Positioning System (GPS) related information and/or other accessories functions. To access this menu, press the Menu key in the home screen and then select Accessories. NOTE The Accessories menu only appears if the radio is equipped with an internal GPS receiver or if it is pre-programmed with another accessory function. GPS GPS Switch — Use this to enable or disable the radio’s GPS feature.
MENU NAVIGATION Time Zone — This function allows setting of the local time zone, so the received GPS time (hours) is correctly displayed. The zone should be correctly set to before the initial use of this feature. For example, if the time at your location is 5.45 hours earlier than GMT, select “GMT+5.45” as your time zone. Publication 14222-1150-2000, Rev.
SCANNING CHANNELS GENERAL INFORMATION The radio’s scan feature allows scanning of radio channels pre-programmed into the radio for call activity. Scan lists can be pre-programmed for each channel and then edited as desired. Each scan list may contain 32 digital or analog channels. When the radio is scanning channels: • The • The LED indicator on the top of the radio flashes orange slowly. • The radio scans the channels currently on the scan list for calls (or other activity).
SCANNING CHANNELS The radio can be pre-programmed with the Auto Scan feature on a per-channel basis. If so, the radio will automatically begin scanning the channel’s scan list when the channel is selected. In this case, to turn scan off, use the Scan menu or, if pre-programmed, press the Scan shortcut key once. Pausing Scan If a call is received on an analog channel and staying on the channel (i.e.
EMERGENCY COMMUNICATIONS GENERAL INFORMATION The radio’s emergency feature can be used to summon help from another radio operator(s) and/or via a radio dispatch/control center. The emergency process has the highest call priority throughout the radio communications system. Emergency operations can be performed when the radio is transmitting or receiving. The radio can be pre-programmed with different emergency modes, emergency types, and emergency ID types. These are described in the following subsections.
EMERGENCY COMMUNICATIONS Emergency Type The radio supports four (4) emergency types, as defined in the following table. To select a different type, consult with your radio dealer: EMERGENCY TYPE Siren Only Regular Silent Silent with Voice DESCRIPTION When an emergency occurs, the radio sounds a shrill alarm tone and displays the icon. When an emergency occurs, the radio gives an audible and a visual indication. When an emergency occurs, the radio does not give any indication, audible or visual.
EMERGENCY COMMUNICATIONS Emergency Operations on Analog Channels Alarm Emergency Mode If the radio is pre-programmed for Alarm emergency mode operations on the selected analog channel, press the pre-programmed Emergency shortcut key transmit an alarm. When an alarm is transmitted, a (red phone handset) icon and “Sending Alarm” is displayed. Also, the LED indicator on the top of the radio rapidly flashes orange then glows red to indicate the alarm transmission.
EMERGENCY COMMUNICATIONS After the voice cycle(s) expires, additional voice calls can be made by pressing the radio’s PTT key. The icon appears in the display and the LED indicator glows red. Release the PTT key to end the voice call (transmission) on the emergency channel. The radio displays the icon and the LED indicator flashes orange rapidly. If an HDC1200-format signaling call is received, the icon appears in the display.
EMERGENCY COMMUNICATIONS The following parameters are pre-programmed by your radio dealer: NOTE • Number of voice cycles; • Duration of each transmission; • Transmission interval; • • • • If without HDC1200 signaling: Number of alarm cycles; and, Alarm duration. • • If with HDC1200 signaling: Number of polite retries; and Number of impolite retries.
EMERGENCY COMMUNICATIONS 2. When the icon appears in the display, speak into the microphone to transmit voice audio. The radio displays the icon when it is ready to receive. When a call is received, the icon appears. After the voice cycle(s) expires, additional voice calls can be made by pressing the PTT key. When doing so, the icon appears in the display and the LED indicator glows red. Release the PTT key to end the voice call (transmission) on the emergency channel.
EMERGENCY COMMUNICATIONS To exit the emergency mode early, simply long-press the programmed Emergency shortcut key. The following parameters are programmed by your radio dealer for the above mode: NOTE • Number of voice cycles; • Number of polite retires; and, • Duration of each transmission; • Number of impolite retires.
EMERGENCY COMMUNICATIONS • If the Lone Worker shortcut key is programmed to a key, press this key to enable or disable the Lone Worker feature. When this feature is enabled (i.e., turned on), the radio briefly displays “Lone Worker On!” When this feature is disabled (i.e., turned off), the radio briefly displays “Lone Worker Off!” Using Lone Worker 1. 2. 3. 4. 5. 6. Enable (i.e., turn on) the Lone Worker feature if it is not already. Refer to the previous section as necessary.
EMERGENCY COMMUNICATIONS MAN DOWN (OPTIONAL) If installed in the radio, the Man Down feature can be used to automatically initiate an emergency when the radio is positioned aslant for a programmed period of time. If the radio has this optional feature, the radio may be programmed to automatically enable the feature upon radio power-up. If a man down capable radio is not programmed in this manner, the Man Down feature must be manually enabled before the feature will function.
HDC1200 SIGNALING GENERAL INFORMATION The radio supports HDC1200 signaling. This signaling is compatible with MDC1200 signaling. It supports functions such as PTT ID signaling, emergency signaling, and signaling via selective call. These functions are supported in both encode and decode modes. TRANSMISSION (ENCODE) PTT ID Transmission Along with voice audio, the radio can transmit an HDC1200-encoded identification (ID) number on the selected channel with each press of the radio’s PTT key.
HDC1200 SIGNALING Release the PTT key to stop transmitting, and listen for a reply. After the transmission, the LED indicator briefly glows orange. The radio can be programmed to either sound a tone when it is transmitting the encoded signal or sound beeps after it has transmitted the encoded signal. 3.
SECURE COMMUNICATIONS GENERAL INFORMATION The radio’s Scrambler feature for analog channels can be used to reduce the likelihood of someone “eavesdropping” via analog radio channels. This feature employs analog voice inversion technology. This feature can be enabled and disabled on a per-channel basis. The radio’s Encrypt feature for digital channels can be used to prevent “eavesdropping” via the digital radio channel. This feature employs 256-bit digital AES encryption technology.
MISCELLANEOUS FEATURES CHANNEL BUSY LOCKOUT If enabled via the programming software, this feature can prevent the radio from interfering with other transmitting radios on the same channel. If the PTT key is held down while the channel is in use, the radio will keep beeping and display “Channel Busy!” alerting of the transmission prohibition. To stop the beeping, release the PTT key. When the channel is free, press and hold down the PTT key to transmit.
MISCELLANEOUS FEATURES RADIO REGISTRATION SERVICE If enabled by your dealer, the radio will automatically register in the system within a certain period after poweron. When registered, it can acquire online information of other radios by accessing specific servers within the valid registration period. GPS REVERT If enabled by your dealer, a registered radio will transmit GPS positioning information to the radio system when the system requests it.
MISCELLANEOUS FEATURES • To send a call on an analog channel, select the channel and then press the programmed One Touch Call shortcut key. • To send a message on a digital channel, select the channel and then press the programmed One Touch Call shortcut key. • To send control service commands on a digital channel, select the channel and then press the programmed One Touch Call shortcut key. TELEMETRY The Telemetry feature allows you to remotely supervise a device connected to a radio.
MISCELLANEOUS FEATURES Use one of these methods to enable or disable roaming: • From the home screen, press the Menu key then select Roaming > On or Off. • Press the programmed Roam shortcut key to toggle roaming on or off. 5-TONE SIGNALING The radio supports 5-tone signal encode and decode operation as follows: 5-Tone Signaling Encode 1. 2. Have your radio dealer configure the correct format and type for the encoding contents.
MISCELLANEOUS FEATURES 2-TONE SIGNALING The radio supports 2-tone signal encode and decode operation as follows: 2-Tone Signaling Encode 1. 2. Have your radio dealer configure the correct format and type for the encoding contents. To send the 2-tone signaling, press the PTT key or the programmed One Touch 1 to One Touch 5 shortcut key. When encoding, the radio sounds a tone, the LED indicator glows red, and the call icon with the contact information above it.
MISCELLANEOUS FEATURES 4. Repeat steps 1 through 3 as necessary to complete a word or sentence. Numbers To enter text via the radio’s keypad: 1. Press the key to switch to number mode. 2. 3. Enter the desired number by pressing the through alphanumeric keys. Repeat steps 1 and 2 as necessary to complete a word or sentence. Punctuation Characters and Special Characters To enter common punctuation characters and special characters, press the desired character appears in the display.
TROUBLESHOOTING AND TECHNICAL ASSISTANCE TROUBLESHOOTING TABLE SYMPTOM POSSIBLE PROBLEMS Battery is dead. Radio will not turn on. Battery is not properly attached to the radio. Battery is defective/bad. Volume is set too low. Antenna is not properly connected to the radio. When receiving, voice audio is weak, erratic, Antenna is damaged or not present. or not present at all. Speaker may be blocked or damaged. On an analog channel, you cannot communicate with others.
TROUBLESHOOTING AND TECHNICAL ASSISTANCE SYMPTOM On an analog channel, irrelevant communications and/or noises are heard. On a digital channel, you cannot communicate with others but there is a receive indication. Noisy communications. Keypad does not operate. Display does not operate. GPS cannot determine location/position POSSIBLE PROBLEMS SOLUTIONS Other radios may be using the same Adjust the squelch and/or consult with your radio frequency. radio dealer as necessary.
TROUBLESHOOTING AND TECHNICAL ASSISTANCE TECHNICAL ASSISTANCE When technical issues arise that cannot be resolved using the troubleshooting table, contact your radio equipment dealer for solution assistance. Also contact your radio equipment dealer for specific information about how the radio is programmed.
CARE AND CLEANING Ensure optimal radio performance as well as a long service life by following these care and cleaning tips: RADIO CARE • Review and follow all precautions described in the radio’s Product Safety Booklet. • Do not hold the radio by its antenna or by a cable connected to its accessory connector. • Do not pierce or scrape the surface of the radio or its accessories. • Always replace the accessory connector’s cover when an accessory cable is not connected to the radio.
MODEL NUMBERS RADIO PACKAGES MODEL NUMBER HD-PFV1B DESCRIPTION Momentum HDP150 Portable Radio, 136 to 174 MHz, with GPS and Standard Accessories HD-PFV1B-MD Momentum HDP150 Portable Radio, 136 to 174 MHz, with GPS and Man Down, and Standard Accessories HD-PFV1B-TXR Momentum HDP150 Portable Radio, 136 to 174 MHz, with GPS (radio only) HD-PFV1B-MD-TXR Momentum HDP150 Portable Radio, 136 to 174 MHz, with GPS and Man Down (radio only) HD-PFU1B Momentum HDP150 Portable Radio, 400 to 470 MHz, with GPS and Stand
MODEL NUMBERS NOTE Standard accessories include one of each item pictured on page 5 (less the radio). Respective part numbers are listed in the tables that follow. Each radio is supplied with one (1) standard antenna, one (1) standard battery, one (1) standard battery charger with power adapter, and various carrying accessories as pictured on page 5.
MODEL NUMBERS BATTERIES AND BATTERY CHARGERS MODEL NUMBER DESCRIPTION HD-PA2V HD-PA2Y HD-CH4D HD-CH4F HD-PS2V HD-PS2T Battery, Lithium-Ion 2000 mAH Battery, Lithium-Ion 2500 mAH Charger, Battery: 1-Bay with Power Adapter Charger, Battery: 6-Bay Power Supply, 6-Unit, Switching Adapter, AC Power, 100 to 240 Vac at 50/60 Hz Input, 12 Vdc Output STANDARD/OPTIONAL Standard Optional Standard Optional Optional Optional CARRYING ACCESSORIES MODEL NUMBER DESCRIPTION HD-HC3M HD-HC3R HD-CL3N 68 Clip, Belt Strap,
MODEL NUMBERS AUDIO ACCESSORIES MODEL NUMBER DESCRIPTION HD-AE6P HD-AE6R HD-AE6S HD-AE6U HD-AE6V HD-AE6W HD-AE6Y HD-AE6Z Earpiece with On-Mic PTT Earpiece with 3-Wire Surveillance Kit D-Earset with In-Line Mic and PTT Earbud with On-Mic PTT Earbud, Receive-Only Speaker-Mic, Waterproof Earpiece, Receive-Only Earpiece, 2-Wire, Wireless Earphone/Neck Publication 14222-1150-2000, Rev.
WARRANTY REGISTRATION AND WARRANTY WARRANTY REGISTRATION Please register this product within ten (10) days of purchase. Registration validates the warranty coverage, and enables Harris to contact you in case of any safety notifications issued for this product. Registration can be made on-line at http://www.pspc.harris.com/Service/WarrantySupport.asp. EQUIPMENT AND RECHARGEABLE BATTERY WARRANTY A.
WARRANTY REGISTRATION AND WARRANTY covered under Paragraph B. To be eligible for no-charge labor, service must be performed at Seller’s location or other Servicer approved by Seller in writing to make the specific repairs at its place of business during normal business hours. Seller shall pay all freight charges relating to the return and shipment of the defective Products and the repaired or replacement Products to and from the Seller designated location.
