User's Manual
Table Of Contents
- SYMBOLS USED IN THIS MANUAL
- REGULATORY INFORMATION
- CHECKING ITEMS IN THE PACKAGE
- RADIO OVERVIEW
- BEFORE USING THE RADIO
- RADIO STATUS INDICATORS
- OPERATIONAL MODE AND STATUS ICONS THE DISPLAY
- LED INDICATOR
- TURNING THE RADIO ON AND OFF
- ADJUSTING THE VOLUME
- SELECTING A ZONE
- SELECTING A CHANNEL
- SWITCHING THE CHANNEL MODE BETWEEN ANALOG AND DIGITAL
- LOCKING AND UNLOCKING THE KEYPAD
- HOME SCREEN
- PRIVATE CALLS
- GROUP CALLS
- ALL CALLS
- TALK-AROUND (DIRECT MODE)
- CALLS ON ANALOG CHANNELS
- BATTERY STRENGTH INDICATOR
- MENU NAVIGATION
- SCANNING CHANNELS
- EMERGENCY COMMUNICATIONS
- HDC1200 SIGNALING
- SECURE COMMUNICATIONS
- MISCELLANEOUS FEATURES
- TROUBLESHOOTING AND TECHNICAL ASSISTANCE
- CARE AND CLEANING
- MODEL NUMBERS
- WARRANTY REGISTRATION AND WARRANTY
BEFORE USING THE RADIO
10
To achieve optimal battery
performance, charge the
battery five (5) hours
before its initial use.
NOTE
CHARGING THE BATTERY
Follow this procedure to charge the radio’s battery:
1. Connect the AC power adapter to an AC power source. See
arrow
.
2. Plug the small plug of the power adapter into the jack at the
rear of the charger. See arrow
.
3. Place the radio with the battery attached, or just the battery
alone, into the slot in the top of the charger. See arrow .
4. Refer to the following table for charge status, as indicated by
the charger’s status indicator.
STATUS INDICATOR CHARGE STATUS
Flashes Red
Slowly
Standby
(No Load/No Battery)
Glows Red
Battery Charging
Flashes Red
Rapidly
Battery or Charger Failure
Glows Orange
Battery 90% Charged
Glows Green
Battery Fully Charged
Read the radio’s Product Safety Booklet for related
information.
CAUTION