User's Manual
Table Of Contents
- SYMBOLS USED IN THIS MANUAL
- REGULATORY INFORMATION
- CHECKING ITEMS IN THE PACKAGE
- RADIO OVERVIEW
- BEFORE USING THE RADIO
- RADIO STATUS INDICATORS- OPERATIONAL MODE AND STATUS ICONS THE DISPLAY
- LED INDICATOR
- TURNING THE RADIO ON AND OFF
- ADJUSTING THE VOLUME
- SELECTING A ZONE
- SELECTING A CHANNEL
- SWITCHING THE CHANNEL MODE BETWEEN ANALOG AND DIGITAL
- LOCKING AND UNLOCKING THE KEYPAD
- HOME SCREEN
- PRIVATE CALLS
- GROUP CALLS
- ALL CALLS
- TALK-AROUND (DIRECT MODE)
- CALLS ON ANALOG CHANNELS
- BATTERY STRENGTH INDICATOR
 
- MENU NAVIGATION
- SCANNING CHANNELS
- EMERGENCY COMMUNICATIONS
- HDC1200 SIGNALING
- SECURE COMMUNICATIONS
- MISCELLANEOUS FEATURES
- TROUBLESHOOTING AND TECHNICAL ASSISTANCE
- CARE AND CLEANING
- MODEL NUMBERS
- WARRANTY REGISTRATION AND WARRANTY
BEFORE USING THE RADIO 
Publication 14222-1150-2000, Rev. A  11 
Attach
Remove
ASSEMBLY AND DISASSEMBLY 
Attaching and Removing the Antenna
To attach the antenna to the radio, place its base into the antenna 
jack on the top of the radio and turn the antenna in a clockwise 
direction. 
To remove the antenna from the radio, simply turn the antenna in 
a counter-clockwise direction until it is free from the radio. 
Attaching the Battery 
To attach the battery to the radio: 
1.  Slide the top of the battery completely into the cavity 
at the rear of the radio. See arrow 
. 
2.  Gently press on the bottom of the battery until a click 
is heard. See arrow 
. This locks the battery to the 
radio. 
Removing the Battery 
To remove the battery from the radio: 
1.  Turn off the radio by rotating it’s  on/off/volume 
control to the full counter-clockwise position. 
2.  Grasp the radio firmly in one hand in a bottoms-up 
position. 
3.  Using  the other hand, slide the battery latch up to 
unlatch the battery, and remove the battery from the 
radio. 










