User's Manual
Table Of Contents
- SYMBOLS USED IN THIS MANUAL
- REGULATORY INFORMATION
- CHECKING ITEMS IN THE PACKAGE
- RADIO OVERVIEW
- BEFORE USING THE RADIO
- RADIO STATUS INDICATORS
- OPERATIONAL MODE AND STATUS ICONS THE DISPLAY
- LED INDICATOR
- TURNING THE RADIO ON AND OFF
- ADJUSTING THE VOLUME
- SELECTING A ZONE
- SELECTING A CHANNEL
- SWITCHING THE CHANNEL MODE BETWEEN ANALOG AND DIGITAL
- LOCKING AND UNLOCKING THE KEYPAD
- HOME SCREEN
- PRIVATE CALLS
- GROUP CALLS
- ALL CALLS
- TALK-AROUND (DIRECT MODE)
- CALLS ON ANALOG CHANNELS
- BATTERY STRENGTH INDICATOR
- MENU NAVIGATION
- SCANNING CHANNELS
- EMERGENCY COMMUNICATIONS
- HDC1200 SIGNALING
- SECURE COMMUNICATIONS
- MISCELLANEOUS FEATURES
- TROUBLESHOOTING AND TECHNICAL ASSISTANCE
- CARE AND CLEANING
- MODEL NUMBERS
- WARRANTY REGISTRATION AND WARRANTY
EMERGENCY COMMUNICATIONS
Publication 14222-1150-2000, Rev. A 49
2. When the icon appears in the display, speak into the microphone to transmit voice audio.
The radio displays the icon when it is ready to receive. When a call is received, the icon appears.
3. After the voice cycle(s) expires, additional voice calls can be made by pressing the PTT key. When doing
so, the icon appears in the display and the LED indicator glows red. Release the PTT key to end the
voice call (transmission) on the emergency channel. The radio displays the icon and the LED indicator
flashes orange rapidly. If a call is received, the icon appears in the display.
To exit the emergency mode early, long-press the programmed Emergency shortcut key.
The following parameters are programmed by your radio dealer for the above mode:
• Number of voice cycles;
• Duration of each transmission; and,
• Transmission interval.
Call Only Emergency Mode
If the radio is programmed for Call Only
emergency mode operations on the
selected digital channel, use this mode as follows:
1. Press the programmed Emergency shortcut key. The radio displays a (red phone handset) icon and
switches to the dedicated/revert channel for the emergency call.
2. If the “Alarm with Call to Follow” feature is enabled, voice audio can be transmitted by speaking into the
microphone when the icon appears in the display.
The radio displays the icon when it is ready to receive. When a call is received, the icon appears.
3. After the voice cycle(s) expires, additional voice calls can be made by pressing the PTT key. When doing
so, the icon appears in the display and the LED indicator glows red. Release the PTT key to end the
voice call (transmission) on the emergency channel. The radio displays the icon and the LED indicator
flashes orange rapidly. When a call is received, the icon appears in the display.
NOTE