User's Manual
Table Of Contents
- SYMBOLS USED IN THIS MANUAL
- REGULATORY INFORMATION
- CHECKING ITEMS IN THE PACKAGE
- RADIO OVERVIEW
- BEFORE USING THE RADIO
- RADIO STATUS INDICATORS
- OPERATIONAL MODE AND STATUS ICONS THE DISPLAY
- LED INDICATOR
- TURNING THE RADIO ON AND OFF
- ADJUSTING THE VOLUME
- SELECTING A ZONE
- SELECTING A CHANNEL
- SWITCHING THE CHANNEL MODE BETWEEN ANALOG AND DIGITAL
- LOCKING AND UNLOCKING THE KEYPAD
- HOME SCREEN
- PRIVATE CALLS
- GROUP CALLS
- ALL CALLS
- TALK-AROUND (DIRECT MODE)
- CALLS ON ANALOG CHANNELS
- BATTERY STRENGTH INDICATOR
- MENU NAVIGATION
- SCANNING CHANNELS
- EMERGENCY COMMUNICATIONS
- HDC1200 SIGNALING
- SECURE COMMUNICATIONS
- MISCELLANEOUS FEATURES
- TROUBLESHOOTING AND TECHNICAL ASSISTANCE
- CARE AND CLEANING
- MODEL NUMBERS
- WARRANTY REGISTRATION AND WARRANTY
MISCELLANEOUS FEATURES
58
• To send a call on an analog channel, select the channel and then press the programmed One Touch Call
shortcut key.
• To send a message on a digital channel, select the channel and then press the programmed One Touch
Call shortcut key.
• To send control service commands on a digital channel, select the channel and then press the programmed
One Touch Call shortcut key.
TELEMETRY
The Telemetry feature allows you to remotely supervise a device connected to a radio. With this feature, you
can control the device and view its status remotely. The method for supervising the device is programmable by
your dealer. These methods are described in the following subsections.
Supervise a Device via Another/Remote Radio
If a device is connected with a radio, you can use another/remote radio to supervise the device. All the radios
involved should be configured with the Telemetry feature. For example, the dealer enables the Telemetry
feature for both Radio A and Radio B, and assigns the Telemetry feature to the SK1 key on Radio A. To
supervise the device C, connect it with Radio B, and press the SK1 key on Radio A.
Supervise a Device via Third-Party Software
If the Telemetry feature is enabled for the radio by your radio dealer, you can supervise the device connected
with the radio via third-party software.
ROAM
This feature allows the radio to communicate between sites in the IP multisite-connected radio system. If
enabled, the radio can communicate via any site in the multisite system, thus ensuring seamless radio
communication in the system.