Installation Manual

14221-1850-4000, Rev. A
96
3. To remove excess dust and dirt from the radio equipment, first brush the equipment with a clean dry
soft-bristle brush.
4. Apply the cleaning product to a soft clean cloth. To prevent excessive vapor concentrations, be sure the
surrounding area is well-ventilated. Do not spray any cleaning product directly on the radio equipment.
5. Wipe the radio equipment clean with the dampened cloth. Always apply the cleaning product to a soft
clean cloth, and then use the dampened cloth to wipe the equipment clean.
6. Next, wipe off the radio equipment with clean damp cloth using mild warm soapy water.
7. Follow-up by wiping the equipment with a clean cloth dampened with only clean warm water.
8. Finish by wiping the equipment dry with clean dry cloth.
9. Re-install the two fuses into their original locations.