Operator's Manual
Table Of Contents
- 1. REGULATORY AND SAFETY INFORMATION
- 1.1 SAFETY SYMBOL CONVENTIONS
- 1.2 RF ENERGY EXPOSURE AWARENESS AND CONTROL INFORMATION FOR FCC OCCUPATIONAL USE REQUIREMENTS
- 1.3 COMPLIANCE WITH RF EXPOSURE STANDARDS
- 1.4 REGULATORY APPROVALS
- 1.5 OCCUPATIONAL SAFETY GUIDELINES AND SAFETY TRAINING INFORMATION
- 1.6 COMMON HAZARDS
- 1.7 SAFE DRIVING RECOMMENDATIONS
- 1.8 OPERATING RULES AND REGULATIONS
- 1.9 OPERATING TIPS
- 2. RENSEIGNEMENTS SUR LA RÉGLEMENTATION ET SÉCURITÉ
- 3. INTRODUCTION
- 4. BASIC OPERATION
- 4.1 RADIO CONTROLS
- 4.2 before first use
- 4.3 POWER ON AND SET VOLUME
- 4.4 vida® ID
- 4.5 RADIO DISPLAYS
- 4.6 STATUS MESsages
- 4.7 PREDEFINED MENU LAYOUTS
- 4.8 MENU
- 4.9 ALERT TONES
- 4.10 SELECT ZONE/SYSTEM
- 4.11 SELECT GROUP/CHANNEL
- 4.12 GROUP CALLS
- 4.13 INDIVIDUAL CALLS
- 4.14 USER PROFILES
- 4.15 NOISE CANCELLATION
- 4.16 VOICE ANNUNCIATION
- 4.17 ENABLE/DISABLE ENCRYPTION
- 4.18 CHANNEL GUARD (ANALOG CONVENTIONAL ONLY)
- 4.19 USE TALKAROUND TO BYPASS REPEATER (ANALOG AND P25 CONVENTIONAL ONLY)
- 4.20 CALL ALERT (PAGE)
- 4.21 TELEPHONE INTERCONNECT
- 4.22 DTMF
- 4.23 AUDIO PLAYBACK
- 4.24 START SCAN
- 4.25 STOP SCAN
- 4.26 MONITOR AND SQUELCH TYPES (CONVENTIONAL ONLY)
- 4.27 NUISANCE DELETE
- 4.28 Failsoft (P25 Trunked)
- 4.29 EMERGENCY OPERATION
- 4.30 MDC-1200 (ANALOG CONVENTIONAL ONLY)
- 5. ADVANCED OPERATIONS
- 5.1 VIEW/CHANGE PERSONALITIES
- 5.2 SITUATIONAL AWARENESS (SA) – P25 CONVENTIONAL ONLY
- 5.3 User Defined Zones
- 5.4 Mixed System Zone
- 5.5 CH INFO MENU
- 5.6 AUDIO SETTINGS
- 5.7 DISPLAY SETTINGS
- 5.8 GPS SETTINGS
- 5.9 POSITION INFO
- 5.10 BLUETOOTH
- 5.11 CLOCK SETTINGS
- 5.12 SELECT LANGUAGE
- 5.13 SET UP SCAN
- 5.14 RADIO STATUS
- 5.15 RADIO MESSAGE
- 5.16 RADIO TEXTLINK
- 5.17 FAULTS/ALERTS
- 5.18 TONE ENCODE
- 5.19 ENCRYPTION
- 5.20 p25 conventional fallback
- 5.21 stealth mode
- 6. PROGRAMMING
- 7. REFERENCE
- 8. GLOSSARY
- 9. BASIC TROUBLESHOOTING
- 10. TECHNICAL ASSISTANCE
- 11. WARRANTY
14221-1850-2000, Rev. A
93
FUNCTION
DESCRIPTION
Scan Enable/Disable Enable/disable scan.
Secure/Clear Enable
Toggle
Toggles Encryption Mode On/Off. See Sections 4.17 and 5.19 for information on
Encryption.
Select Channel/Group
Bank
Select the channel/group bank. If your system has more than 64 channels, this allows
you to select a channel group with channels 65 to 127, 128 to 191, etc.
Selected Profile Toggle Toggles between the currently active profile (if one has been selected) and no profile.
Send Message Sends a preconfigured message. See Section 5.15 for more information.
Send Status Sends a preconfigured status. See Section 5.14 for more information.
Site Alias Accesses the Site Alias list. See Section 5.13.8 for more information.
Site Roaming Toggle Enable/disable Site roaming. Site Roaming allows the radio to roam to another site.
Speaker Mute Toggle Toggles Speaker Muted/Unmuted.
Stealth Mode Enable/disable Stealth Mode. See Section 5.21 for more information.
System Down
Scrolls down through the list of available systems, stopping when the end of the list is
reached.
System Down Wrap
Scrolls down through the list of available systems, wrapping to the top when the
bottom of the list is reached.
System Up Scrolls up through the list of available systems, stopping at the top of the list.
System Up Wrap
Scrolls up through the list of available systems, wrapping to the end when the
beginning of the list is reached.
Talkaround/Repeater
Toggle
Toggles talkaround On/Off. See Section 4.19.
TX Power High/Low Toggle TX Power between LOW and HIGH.
View SA Display Displays the Situational Awareness (SA) screen.
Voice Announcement
Toggle
Enable/disable Voice Annunciation. See Section 4.16.
Zone Down
Scrolls down through the list of available mixed system zones, stopping when the end
of the list is reached. If no mixed system zones are defined, or there is only one, the
user will hear a deny tone when the button is pressed.
Zone Down Wrap
Scrolls down through the list of available mixed system zones, wrapping to the top
when the bottom of the list is reached. If no mixed system zones are defined, or there
is only one, the user will hear a deny tone when the button is pressed.
Zone Up
Scrolls up through the list of available mixed system zones, stopping at the top of the
list. If no mixed system zones are defined, or there is only one, the user will hear a
deny tone when the button is pressed.
Zone Up Wrap
Scrolls up through the list of available mixed system zones, wrapping to the end when
the beginning of the list is reached. If no mixed system zones are defined, or there is
only one, the user will hear a deny tone when the button is pressed.