Product Info

54 Voice Command
1 Scroll to S
ETTINGS, YES, Voice control, YES, Voice
commands
, YES, Contacts, YES, Add voice, YES.
2 Enter the first letter of the contact name and press
YES.
3 Select a contact and press
YES.
4 Follow the instructions in the display.
Note! An icon appears next to the contact names which
have a voice command.
Caller Name
You can choose whether you want to hear the recorded
voice command for a name when you receive an
incoming call.
1 Scroll to S
ETTINGS, YES, Voice control, YES, Voice
settings
, YES, Caller name, YES.
2 Select
On or Off.
Voice Dialing
Voice Activated Dialing
1 From standby, press and hold YES until you hear a
tone.
2 Release
YES, lift the phone to your ear and say a
name, for example “John”. The name is played back
to you.
3 If you have saved several numbers for that contact:
After a second tone, say a number type that you
have recorded earlier, for example “home”. The
number type is played back to you, and the call is
connected.
Note! Only the number types available for that contact
are played to you. Other and Fax number types are
not available for voice dialing.
From standby, you can also initiate voice dialing, voice
profiles and voice control of voice memos by:
• sliding and holding the volume key.
• pressing and holding the handsfree button (when
using a portable handsfree or a Bluetooth headset).
• saying the magic word. See “The Magic Word” on
page 56.
Voice Digit Dialing