User Manual

41
NOTE
Speed dial numbers are defined and provisioned by the
OpenSky network administrator and cannot be manually
entered into the radio by the user. Contact the
administrator if changes to the speed dial list are
required.
1. If using the microphone’s DTMF keypad:
A. Press *8 on the keypad.
B. Enter the number of the radio to be called (e.g., 027-001-0006). Like
dialing a telephone number, ignore/do not enter dashes
. If the region
number (first 3 digits; 027 in this example) is the same as this radio’s
region number, these digits do not need to be entered. Likewise, if
the region and agency numbers (first 6 digits; 027-001 in this
example) are the same as this radio’s numbers, these digits do not
need to be entered. Leading zeros can also be ignored.
C. Press and release the # key.
D. Wait approximately two (2) seconds.
E. Press and release the PTT button to initiate the selective call request.
When the called party accepts the call, press the PTT again and begin
speaking.
If using the buttons on the front of the radio:
A. Scroll through the Menu options using the ▲ and ▼ buttons until
“SpeedDial” appears in the bottom line of the display.
B. Using the ◄ and ► buttons, scroll through the pre-programmed
speed-dial numbers until the desired number appears in the display.
2. Continue by pressing the PTT button when speaking (transmitting) to the
caller.
3. To end the call, press the Select button. The network limits selective calls
to ten (10) minutes maximum.
3.7.2 Receiving a Selective Call
When someone calls in from another radio using the selective call function a
ring will sound in the speaker and/or headset. Press the ► button to answer
the call and press the microphone’s PTT button when speaking (transmitting)
to the caller. Press the Select button to end the call.
A selective call will be interrupted if an emergency is declared on a monitored
talk group. The network limits selective calls to ten (10) minutes maximum.