User Manual

52
If a secure (encrypted) call is in progress, and the user has not entered the key,
the bottom of the dwell display will alternate between “No Access” and the
alias of the radio that is currently engaged in the secure call.
Once the user has terminated manual encryption, “UnSecure” appears
temporarily in the bottom line of the dwell display.
3.13 PRESET BUTTONS
The front panel contains three buttons labeled A, B, and C. By holding one of
these buttons down for approximately three (3) seconds, the following current
information is saved to the function of that button:
• Selected talk group
• Selected profile
• Selected priority talk group
• Lockouts
• Scan mode
• Intercom mode
When information has been saved to a preset, the button will be illuminated
green. If the button is not designated as a preset, it will be illuminated red.
Presets are saved and restored to/from non-volatile memory. Changing the
User ID (login in as a different user) will clear the presets, as they are stored
on a per-user basis. Changing control heads will not recall presets for the
previous control head.
3.14 DYNAMIC REGROUPING
Dynamic regrouping requires that the network administrator determine which
radio users should be formed into an impromptu talk group to respond to
particular emergency conditions.
The administrator will edit the personalities of the affected radios to include
an emergency profile, then page the affected radios to re-register with the
network to receive their edited personalities.
In response, affected radios automatically re-register to receive their edited
personalities. During re-registration, subscriber equipment will default to the
emergency profile selected by the administrator.
3.15 GPS COORDINATES
If the radio is equipped with a Global Positioning System (GPS) receiver, the
radio’s current latitude and longitude coordinates (“fix”) may be displayed
using the “GPS Fix” menu. The following procedure assumes a GPS antenna