Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix J: Client: Harris Corp. ID’s: BV8WM4900CL/3670A-WM4900CL Model#: VM-WM4900-CL001 Standards: FCC Pt 90/IC RSS-111 RTL Report #: 2010195 Manual Please refer to the following pages.
Product Manual MM-018965-001 Oct/10 VIDA Broadband 4.
MM-018965-001 MANUAL REVISION HISTORY REV DATE - Oct/10 REASON FOR CHANGE Initial release. Harris Corporation Client, 4.9 GHz, 802.16 VBB 5/10 14002-1000-01 VM-WM4900-CL001 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CREDITS Harris, assuredcommunications, EDACS, and OpenSky are registered trademarks and NetworkFirst is a trademark of Harris Corporation.
MM-018965-001 SOFTWARE LICENSE AGREEMENT THE SOFTWARE PROGRAM PROVIDED WITH THIS DOCUMENT IS FURNISHED UNDER A LICENSE AND MAY BE USED ONLY IN ACCORDANCE WITH THE FOLLOWING LICENSE TERMS. Harris Corporation, hereafter referred to as COMPANY, grants to you, hereafter referred to as USER, a nonexclusive, paid up license to use the accompanying Software, the media on which it is recorded, and Programming Guide, all hereafter referred to as PRODUCT, for use under the following terms and conditions: 1.
MM-018965-001 TABLE OF CONTENTS Section 4 Page 1 REGULATORY AND SAFETY INFORMATION .................................................................... 7 1.1 REGULATORY APPROVALS ............................................................................................ 7 1.1.1 Transmitter ............................................................................................................... 7 1.1.2 Receiver .......................................................................................
MM-018965-001 TABLE OF CONTENTS Section 6.3 Page INSTALLING THE NOMADIC CLIENT .......................................................................... 32 7 SUBSCRIBER STATION CONNECTIONS ............................................................................ 33 7.1 POWER CONNECTIONS .................................................................................................. 33 7.1.1 Subscriber Station DC Connections .......................................................................
MM-018965-001 TABLE OF TABLES Page Table 1-1: MPE Minimum Distance Calculation for Fixed Client Installations Using High Gain Antennas ...................................................................................................................................................... 10 Table 1-2: MPE Minimum Distance Calculation for Nomadic Client Installations............................ 13 Table 2-1: Related Documentation .................................................................................
MM-018965-001 1 REGULATORY AND SAFETY INFORMATION 1.1 REGULATORY APPROVALS 1.1.1 Transmitter The transmitting devices listed below have been tested and meet the following regulatory requirements: MODEL DESCRIPTION BW (MHz) FCC ID (PART 90) INDUSTRY CANADA (RSS-119) VM-WM4900-CL001 Broadband Client 5 or 10 BV8WM4900CL 3670A-WM4900CL 1.1.
MM-018965-001 with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the product. Harris Corporation assumes no liability for the customer's failure to comply with these standards. WARNING CAUTION The WARNING symbol calls attention to a procedure, practice, or the like, which, if not correctly performed or adhered to, could result in personal injury.
MM-018965-001 1.3 RF ENERGY EXPOSURE INFORMATION FOR FIXED OPERATION 1.3.1 Maximum Permissible Exposure Limits DO NOT TRANSMIT with this Client and antenna when persons are within the MAXIMUM PERMISSIBLE EXPOSURE (MPE) Radius of the antenna. The MPE Radius is the minimum distance from the antenna axis that ALL persons should maintain in order to avoid RF exposure higher than the allowable MPE level set by the FCC.
MM-018965-001 1.3.2.2 MPE Calculation for Directional Antenna This MPE Minimum Distance Calculation is based on using a directional antenna with more than 9 dBi antenna gain. Basic Harris 4.9 GHz VIDA Broadband Client specifications: P: Maximum Peak Conducted Power = 30 dBm G: Maximum Omni Antenna Gain – Cable Loss = 27 dBi – 1 dB = 26 dBi; (Use numerical GN value for the calculation ): GN = 10 ^ (G /10); For G = 26 dBi, GN = 10 ^ (26 /10) = 398 Frequency Range = 4.90 to 4.
MM-018965-001 1.3.3 Safety Training Information YOUR HARRIS VIDA BROADBAND CLIENT GENERATES RF ELECTROMAGNETIC ENERGY DURING TRANSMIT MODE. THIS CLIENT IS DESIGNED FOR AND CLASSIFIED AS “OCCUPATIONAL USE ONLY,” MEANING IT MUST BE USED ONLY IN THE COURSE OF EMPLOYMENT BY INDIVIDUALS AWARE OF THE HAZARDOUS RF ENERGY AND THE WAYS TO MINIMIZE EXPOSURE. THIS STATION IS NOT INTENDED FOR USE BY THE “GENERAL POPULATION” IN AN UNCONTROLLED ENVIRONMENT.
MM-018965-001 1.4 RF ENERGY EXPOSURE INFORMATION FOR MOBILE OPERATION The FCC requires licensees and manufacturers to meet radio frequency radiation exposure compliance as defined by FCC rule 47 CFR §2.1091 and as discussed in FCC document OET Bulletin 65: Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields.
MM-018965-001 CAUTION Table 1-2 lists the recommended minimum lateral distance for a controlled environment and for unaware bystanders in an uncontrolled environment, from transmitting types of antennas the at rated radio power for nomadic Client radios installed in a vehicle. Transmit only when unaware bystanders are at least the uncontrolled recommended minimum lateral distance away from the transmitting antenna. Table 1-2: MPE Minimum Distance Calculation for Nomadic Client Installations 4.
MM-018965-001 1.4.3 Occupational Safety Guidelines and Safety Training Information To ensure bodily exposure to RF electromagnetic energy is within the FCC allowable limits for occupational use. Always adhere to the following basic guidelines: 1. The radio should only be used for necessary work-related communications. 2. The radio should only be used by authorized and trained personnel. It should never be operated by children. 3. Do not attempt any unauthorized modification to the radio.
MM-018965-001 The space containing the radio equipment must be isolated by a seal from the space containing the LP gas container and its fittings. Outside filling connections must be used for the LP gas container. The LP gas container space shall be vented to the outside of the vehicle. • Vehicles Equipped with Airbags — For driver and passenger safety, avoid mounting the radio or any other component above or near airbag deployment areas.
MM-018965-001 1.4.6 Mobile Operating Tips The following conditions tend to reduce the effective range of two-way radios and should be avoided whenever possible: • Operating the radio in areas of low terrain, or while under power lines or bridges. • Obstructions such as mountains and buildings. NOTE 16 In areas where transmission or reception is poor, communication improvement may sometimes be obtained by moving a few yards in another direction, or moving to a higher elevation.
MM-018965-001 2 INTRODUCTION 2.1 ABOUT THIS MANUAL This manual is written for the communications professional responsible for installing and maintaining the VIDA Broadband Subscriber Station (Client) equipment installed as part of a VIDA Broadband 4.9 GHz Broadband Network. This manual provides an overview of the VIDA Broadband Client equipment used in the VIDA network.
MM-018965-001 2.3 GLOSSARY OF TERMS The following Table is a list of terms used in this manual.
MM-018965-001 3 DESCRIPTION The 4.9 GHz VIDA Broadband Client is part of Harris’ VIDA Broadband network. The VIDA Broadband Client may be installed in fixed or nomadic applications and is designed to operate using AC or DC input voltage and communicate through a 100Base-TX Ethernet data port. Figure 3-1: VIDA Broadband Client 3.1 SUBSCRIBER STATION CONFIGURATIONS The 4.9 GHz VIDA Broadband Client is shown in Figure 3-1.
MM-018965-001 bandwidth intensive applications. Since the network provides guaranteed Quality of Service (QoS), it is especially suited for applications such as video surveillance, perimeter control, and mobile command. VIDA Broadband is integrated with the VIDA network allowing seamless sharing of network resources, including hardware network management and administration. Figure 3-2: VIDA Broadband Network The basic architecture of the 4.9 GHz VIDA Broadband network is a point-to-multipoint network.
MM-018965-001 for the VIDA Broadband Client to request bandwidth. protocol provides significant advantages such as: This coordinated scheduling feature of the • Minimizes contention between clients. • Maximizes channel utilization. • Maximizes ability to coordinate frequency usage among users. • Enables guaranteed bandwidth services for critical applications.
MM-018965-001 4 UNPACKING AND CHECKING EQUIPMENT Before unpacking, installing or operating the VIDA Broadband equipment, read this section of the manual thoroughly. It contains detailed unpacking and handling instructions, and safety precautions to protect users and equipment. 4.1 UNPACKING EQUIPMENT The VIDA Broadband equipment may be shipped in separate transit packages. The associated cabling and accessories for each unit, if any, may also be shipped in separate containers.
MM-018965-001 5 PLANNING A FIXED STATION INSTALLATION 5.1 GENERAL Careful planning a preparation of any installation will always benefit the end result. Please refer to the VIDA Broadband Installation Manual, MM-014720-001 for detailed planning and installation instructions. 1. Always read and follow all installation instructions, local and national building and electrical codes, and general safety rules. 2.
MM-018965-001 5.3 • Ensure that any future building construction or tree growth will not obstruct the radio path. • Ensure there is sufficient clearance around the Fresnel Zone so there is minimal interference from obstacles along the radio propagation path. • Ensure the installation adheres to any local and national building codes and permits. • Ensure sufficient electrical power is available at the installation site.
MM-018965-001 5.5 SURGE PROTECTION When installing a VIDA Broadband Base Station, MultiLink Station, or Subscriber Station you should always install external surge protectors to protect the system components from lightning or transient damage. Table 5-1 lists surge protectors that have been tested in VIDA Broadband systems and are available from Harris. Detailed descriptions of these devices can be found in the VIDA Broadband Installation Manual, MM-014720-001.
MM-018965-001 5.6.1 Antenna Requirements There are several basic “types” of antennas. Each type has certain advantages and disadvantages for particular applications in microwave and broadband wireless networks. Antennas and any associated cabling which connects the antenna to the Broadband equipment comprise an “Antenna System.” In this Antenna System all cable loss is subtracted from the antenna gain, the result being the Effective Antenna System gain.
MM-018965-001 Standard Parabolic Antennas Standard parabolic antennas consist of a parabolic shaped reflector spun from a sheet of aluminum. The parabolic shape focuses energy at the feed point of the antenna. The parabolic antennas have a narrow focused beam of energy and relatively high gain compared to many other types of antennas. These antennas will have a mounting system to attach the antenna to a pipe or tower leg.
MM-018965-001 5.7 CLIENT MOUNTING The VIDA Broadband Client is designed for pole or structure mounting. Pole mounting a Client may include mounting the unit onto a horizontally suspended light post or side arm, or a vertical telephone pole, mast pipe or tower leg. Mounting on a structure requires using an optional mounting plate. Each subscriber station package includes a mounting bracket (14000-0067-01) and necessary hardware for attaching the brackets to the units.
MM-018965-001 6 PLANNING A NOMADIC CLIENT INSTALLATION This section provides general information regarding installation of the VIDA Broadband Client in nomadic station configurations. For best results, the client should be installed by one of the many Harris Authorized Service Centers located throughout the United States. Their experienced service personnel can provide a proper radio installation and make any final adjustments that may be needed.
MM-018965-001 6.1 RECOMMENDED KITS AND ACCESSORIES We recommend using the following parts and accessories during installation of the client in a nomadic configuration. 6.1.1 Mounting Bracket The mounting bracket 14000-0067-01, shown in Figure 6-1, attaches to the bottom of the client and provides easy installation of the client in a variety of applications. Attach the bracket to the client using the hardware provided. Figure 6-1: Mounting Bracket 6.1.2 DC Power Cable Kit The 4.
MM-018965-001 Table 6-1: Fuse Distribution Rail Kit KIT NUMBER FS23057 QTY/DESCRIPTION PICTORIAL Kit, Fuse Distribution Rail. Includes: (1) Fuse Distribution Rail Assembly (1) In-Line ATC Fuse Holder (1) 15-Amp ATC Fuse (1) 30-Amp ATC Fuse 20 Feet of 10-AWG Red Wire 1 Foot of 10-AWG Black Wire (1) Moisture-Resistant Butt Splice (2) 3/8-Inch Ring Terminals. FS23058 Kit, Fuse Distribution Accessory.
MM-018965-001 6.2 NOMADIC STATION ANTENNA OPTIONS The recommended nomadic antenna model is the AN-013386-011. Electrically, the antenna requires no ground plane to meet VSWR performance specifications. However, it may be necessary to use this antenna with a ground plane to meet MPE requirements. Low loss high frequency permanent and magnetic mount cable kits, listed in Table 6-2, are also available. Table 6-2: Nomadic Antenna and Mounts PART NUMBER AN-013386-011 MAXRAD: MEFC49005HF 6.
MM-018965-001 7 SUBSCRIBER STATION CONNECTIONS 7.1 POWER CONNECTIONS Power is supplied to the client through a 2-pin connector. A #12-16 Socket Multi-Con-X mating connector kit, CN-014934 is supplied with the unit. A pre-made 2/12 AWG Power Cable assembly, CA014984-XXXXX or CA-014988-XXXXX, is available in various lengths. Refer to the VIDA Broadband Installation Manual, MM-014720-001 for details. 7.1.1 Subscriber Station DC Connections Table 7-1: Client DC Power Connector 7.1.
MM-018965-001 Antenna Power Network Port Figure 7-1: VIDA Broadband Client Interface Diagram 7.2 NETWORK/DATA CONNECTIONS Network connections are made using a standard Ethernet RJ-45 protocol connection. All DATA connectors are industrial grade, rugged, UV rated, weatherproof, dustproof and made for use in extreme electrical and climatic conditions. Each connector meets the IP67 industrial standard for weatherproof and dustproof electrical connections.
MM-018965-001 2. Connect one end of the cable to the LAN connection. 3. Mate the other end of the Data cable to the station data connector by visually aligning the connector key and firmly push and turn the outer locking ring clockwise until it clicks. 4. Be sure to install a dust cap on any ports not being used. 5. For Cat5e copper Ethernet cables, install a grounding kit within six inches of the unit and then every 75 feet.
MM-018965-001 7.4.1 Installing an Omnidirectional Antenna An omnidirectional antenna may be mounted directly to the Client using the following procedure: 1. Connect an N-type male to male RF adapter (not included) to the omnidirectional antenna. Handtighten the connector. 2. For Copper Clients, external lightning protection is required to provide maximum protection to the site. Connect the optional lightning suppressor to the antenna assembly as shown in Figure 7-2.
MM-018965-001 7.4.3 Remotely Mounting an Antenna When installing an antenna remotely, always observe best practices and the antenna manufacturer’s recommendations. Refer to the VIDA Broadband Installation Manual, MM-014720-001 for installation instructions.
MM-018965-001 8 TROUBLESHOOTING AND SERVICING There are no user serviceable components within the VIDA Broadband radio equipment assemblies. These assemblies contain ESD sensitive components and should only be serviced by Harris qualified personnel. 8.1 TROUBLESHOOTING If a unit is suspected to be faulty or need service and repair, perform the following checks: 1. Visually inspect the installation for obvious defects such as worn, weathered, or frayed cabling. 2.
MM-018965-001 9 CUSTOMER SERVICE 9.1.1 Technical Support The Technical Assistance Center (TAC) resources are available to help you with overall system operation, maintenance, upgrades, and product support. TAC is your point of contact when you need technical questions answered. Product specialists, with detailed knowledge of product operation, maintenance, and repair, provide technical support via a toll-free telephone number (in North America). Support is also available through mail, fax, and e-mail.
MM-018965-001 10 SPECIFICATIONS 10.1 GENERAL SPECIFICATIONS Model Number: VM-WM4900-CL001 Physical Characteristics: Electrical Power: Power over Ethernet, +24 Vdc (nominal) or 24 Vac Power Consumption: 6 Watts typical Size (H x W x D): 8.2 × 4.9 × 1.6 in (20.9 × 12.4 × 4.1 cm) Weight: 1.6 lbs (0.
MM-018965-001 10.2 DATA SPECIFICATIONS Security Features: Authentication: X.509 Digital Certificate Authorization: RSA Public Key Encryption Encryption: AES 128 bit Network Features: Management: SNMP Convergence: IPv4 IEEE 802.
MM-018965-001 RF Power Output: 27 dBm maximum Output Power Control: 50 dB FCC ID: BV8WM4900CL Industry Canada: 3670A-WM4900CL Spectrum Mask: FCC Mask M (90.210) 10.4 RECEIVER SPECIFICATIONS Frequency Band: 4.905-4.
MM-018965-001 WARRANTY Please register this product within 10 days of purchase. Registration validates the warranty coverage, and enables Harris to contact you in case of any safety notifications issued for this product. Registration can be made on-line at www.pspc.harris.com/CustomerService or by contacting Harris Warranty Administration at the following: U.S. & Canada: Phone Number: 1-800-368-3277, Option 4 (toll free) Fax Number: 1-434-455-6821 E-mail: mailto:WarrantyClaims@Harris.
Public Safety and Professional Communications | www.pspc.harris.
