FCC ID : :O5XHL-321B ATTACHMENT E. - USER’S MANUAL - REPORT NO.
Contents Foreword ■ Caution 3 ■ Important Safety Instructions 4 Overviewing your the Monitor ■ Viewing the Control Panel 9 ■ Viewing the Connecting Panel 10 ■ Viewing the Remote Control - Key Description 12 - Teletext / PIP(Picture In Picture) 13 - Loading the Batteries 15 Installation ■ Table Stand Installation 16 ■ Speaker Installation 17 Connection the Cable/Devices ■ Connection the TV Cable 18 ■ Connection the VCR 19 ■ Connection the DVD 20 ■ Connection the Set Top Box 21 ■ Con
Contents Setting the Picture ■ Video NR (Noise Reduction) 32 ■ Selecting the Film Mode 33 ■ Changing the Screen Form 35 ■ Selecting the Black Enhancer 36 ■ Adjusting the PC Screen(Geometry) 36 ■ Native Mode 38 Setting the Sound ■ Adjusting the Sound Balance 40 ■ Changing the Sound Mode 40 ■ Adjusting User Sound Mode 41 ■ Spatial Effect 41 ■ AVC (Auto Volume Control) 41 ■ MTS (Multichannel Television Sound) 42 Setting the Others ■ Aujusting the Transparency of the OSD Window 43 ■ PI
Caution CAUTION - TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. - DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - SHOCK HAZARD DO NOT OPEN. CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. CAUTION The stand intended for use only with This TV.
Important Safety Instructions Always be careful when using your TV. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any of the ventilation openings.
Precaution Follow all operating and use instructions. Unplug the Monitor from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol cleaners. Do not use the Monitor where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc. Never add any attachments and/or equipment without approval of the manufacturer. Such additions can increase the risk of fire, electric shock, or other personal injury.
Precaution Provide ventilation for the Monitor. The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings with any object, and do not place the Monitor on a bed, sofa, rug or other similar surface. Do not place it near a radiator or heat register. If you place the Monitor on a rack or bookcase, ensure that there is adequate ventilation and that you've followed the manufacturer's instructions for mounting.
Precaution Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock. Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. Never spill liquid of any kind on the Monitor. Bend antenna cable between inside and outside building to prevent rain from flowing in. -This may cause water damaged inside the Monitor and could give an electric shock. Ground outdoor antennas.
Precaution When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit. Upon completion of any service or repairs to this Monitor, ask the service technician to perform safety checks to determine that the Monitor is in a safe operating condition. Only use the specified batteries.
Viewing the Control Panel OSD Key Position Front Panel OSD key & Function n Input Source Select o UP p DOWN (See the box below.) q On / Off (Stand By) r Remote Sensor s Status / Power Indicator LED OSD Key Function INPUT SELECT Select the signal source from multiple input sources such as TV, SCART 1, SCART 2, S-Video / AV, Component1, Component2, PC and DVI. VOL/CH ▲ / ▼ To change the CHANNEL, Press ▲ key first and change the CHANNEL with ▲, ▼ keys.
Viewing the Connecting Panel Back Panels and Jacks Back panel of the monitor ① RS-232C To control from PC ② DVI For PC,Set top box.
Viewing the Connection Panel 1. RS-232C JACK Connects a control signal from a PC. 2. DVI Input JACK Connects a digital video signal from a DVI output jack of PC or Set Top box. 3. D-SUB(PC),DVI Sound 4. RGB PC Input JACK ( D-SUB ) Connects a video signal from a video output jack of PC. Cables connecting the PC vary according to the type of machine, so contact your product dealer. 5.
Remote Control 1. Stand by Turn the PDP on and off. 2 1 2. Mute Temporarily cut the sound and restore it. 3 5 3. Pre.CH Turn to the previous channel or exit OSD. 4 4. V.Size Choose the screen form. 16:9 > Panorama > Zoom1 > Zoom2 > 4:3 5. FAVORITE (FAVOURITE) Tune to your next favorite channel. 6. 6 7 Press to tune the channels over 100. 7. 10 8 9 100 INPUT Display the input source list. 8. Menu / Set Display the main OSD menu. 13 12 Activate your choice in the OSD menu. 9.
Remote Control 1. MTS Choose the MTS (Stereo) mode. Each time it is pressed, different mode is selected. Mono > Stereo > Nicam > Bilingual * You can select only available modes depending on the source. 2. CH INFO Display the current information about time, screen form, source and MTS mode. 3. PICTURE There are 4 picture modes. STANDARD > Vivid > Mild > USER 4. STILL Temporarily freeze the screen and restore it. 5. SOUND Choose the sound equalizer settings. STANDARD > Movie > Music > News > USER 6.
Viewing the Picture-in-Picture MOVE KEY : Move the position of PIP Left Up Right Up (Start) Left down Right Down SWAP KEY : Swap the sources of the main screen and PIP Window. MODE KEY : Change the PIP window mode. OFF→SMALL→LARGE→TWIN SMALL LARGE TWIN Source Key : Change the source of the PIP window.
Controls Of The Remote Control Loading The Batteries Press on the cover and slide in the direction of the arrow. Load two AAA batteries, taking care that the + and ends face the correct direction. Close the cover until it clicks.
Monitor Installation Table Stand Installation(optional) • Table Stand mount minimum allowable clearances for adequate ventilation.
Monitor Installation Speaker Installation(optional) •CAUTION: Please make sure Speaker Wires should be connected as above, ferrite core are to be nearer to the main unit not to speakers to avoid possible electromagnetic-interference. • Be sure monitor power is turned off before making any connections. Place the speakers in the position you want. Install the speaker wires on the monitor and speaker. Be sure to connect the positive “+” wire to the “+” input and the negative “-” wire to the “–” input.
Watching TV TV Antenna Cable Connection the TV Cable Connect the TV antenna cable to the TV input jack. Press INPUT button on the remote control and select TV on OSD. Use CH+, CH- button or numeric key to change TV programme for your programme selection. Press Pre CH key on the remote control to tune the previous programme. Also, you can tune to cable service provided programmes using the cable box. For further information regarding cable TV service, contact cable TV service provider(s).
Watching VCR AV 2 AV 1 Connecting the VCR S-Video AV 3 input With SCART (Eurocable) Sound of S-Video / AV Connect a SCART cable to the SCART jacks of the VCR and the TV. With S-Video Connect a S-Video cable to the S-Video jacks of the VCR and the TV. Connect L (White), R (Red) sound cable (composite) to the sound jacks of the VCR and the TV. With AV input Connect a composite cable to the AV video jacks of the VCR and the TV.
Watching DVD Connecting the DVD • Connect the three separate component video cables to the DVD player’s Y, Pb and Pr jacks and to the Component jacks on the TV. • Connect the audio cable to the DVD player’s audio L (White) and R (Red) jacks and to the L and R audio jacks beside the Component jacks on the TV.
Watching Set Top Box How to connect Connect Set Top Box video inputs to SCART, COMPONENT, PC or DVI jacks on the TV. Audio inputs to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs.. How to use Supported Signals Component1 Turn on the Set Top Box. Press INPUT button on the remote control of the TV and select Component1, Component2, PC or DVI.
Connecting The PC (D-Sub and DVI) D-Sub 15 pin (VGA) from PC DVI from PC X Connecting a PC to the TV • Connect a PC (15pin) video cable between the Video Output port on the PC and the PC port on the TV. X Pin Configuration • 15Pin Signal Cable (based on protruded pin) Description Red (R) Green (G) X To watch the PC screen Blue (B) 1. Turn on the TV and press INPUT button to select the PC MODE. Grounding Grounding (DDC) 2. Turn on the PC and check for the PC requirements. Red (R) Grounding 3.
Displayable Monitor Specification Resolution 640 x 350 640 x 400 640 x 480 800 x 600 Horizontal Frequency (KHz) Vertical Frequency (Hz) 31.468 70.09 37.861 85.08 31.469 70.08 37.927 85.03 31.469 59.94 35.000 66.66 37.861 72.80 37.500 75.00 43.269 85.00 45.913 90.03 53.011 100.04 64.062 120.000 35.156 56.25 37.879 60.31 48.077 72.18 46.875 75.00 53.674 85.06 56.000 90.00 64.016 100.00 832 x 624 49.725 74.55 852 x 480 31.468 60.05 48.363 60.00 56.476 70.
Basic Operation Turning the Monitor On And Off Press the Power key on the remote control. The TV will turn on and you will be ready to use its features. You can also use the Power key on the front panel. Select Source Press INPUT key on the remote control. Then you can see the source list menu shown as below. Source Change 1 TV 2 AV 1 3 AV 2 4 S-VIDEO / AV 3 5 COMPONENT 1 Select the source to watch with CH+ / CH- key on the remote control and press the Menu / Set button.
OSD Menu Structure • OSD (On Screen Display) allows users to control or adjust various features and settings in accordance with his/her preferences. • Press the Menu/Set button on the remote control to see the main OSD menu. EXAMPLE of OSD Menu 1 2 A B ◄► 1. part Main Menu Press Menu / Set key on the remote control to enter the main OSD menu. First, select Main menu item you need with CH+ & CH- key. To select a main menu items, just press VOL+ or Menu/Set button on the Remote Control. 2.
CHANNEL (TV) Store TV channels • Channel Type Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna, a standard cable system, an HRC, or an IRC). 1. Press Menu/Set button to display the main OSD menu. 2. Select the TV main menu item. 3. Press Menu/Set to enter the sub menu. 4. Select Channel Type and press VOL+ button to enter the ◄► parts. Then the cursor moves into the ◄► parts. 5.
CHANNEL (TV) • Fine Tune The Fine Tuning function lets you manually adjust the TV’s tuner if you have difficulty tuning analog Channels. 1. Press Menu/set button to display the main OSD menu. Auto Scan 2. Select the TV main menu. 3. Press Menu/Set to enter the Fine tune sub menu. Manual Scan 4. Select Fine tune with CH+ / CHbutton and press Menu/Set button. Then you can see the adjust bar. Fine tune 5. Edit Adjust the fine tune with VOL+ or VOL- button. Fine tune \0 ІІІІІІІІІІІІІІІІІІІІІІІІІІ
CHANNEL (TV) • Set the favorite channel. You can store of your favorite channels for each available input source (such as TV or CATV). Then, when you press the FAVORITE button on the remote control, the PDP display only the favorite channels you previously stored, allowing you to quickly and easily find frequently wanted channels. 1. Press Menu/set button to display the main OSD menu. 2. Select the TV main menu. 3. Press Menu/Set to enter the TV sub menu. Fine tune 4.
PICTURE • Mode - Your TV has 3 automatic factory preset picture settings (“Standard”, “Sharp” and “Mild”). You can choose Standard, Vivid or Mild by pressing “Picture” key on the remote control (or by making a selection from the menu). Or you can select USER which automatically recalls your personalized picture settings. 1. Press Menu/set button to display the main OSD menu. Mode 2. Select the picture main menu. Temparature Normal 3. Press Menu/Set to enter the sub menu. VIdeo NR ◄ OFF ► 4.
PICTURE Picture Mode is to set CH+ or adjust Picture Adjust, Mode, Video Noise Reduction, Screen Format and Burn Protection. • Adjust USER Mode You can change the Contrast, Brightness, Color, and Sharpness according to personal preference in USER mode. Select USER mode (Previous page) 1. Select the item to adjust with CH-, CH+ button. 2. Press Menu/Set button. 3. Adjust the item with VOL-, VOL+ button. 4. To cancel all adjust, select Recall and press Menu/Set button.
PICTURE • Contrast Adjust brightness difference between bright part of the screen and dark part. Distinct ◀ ▶ Vague Dark ◀ ▶ Bright • Brightness Adjust brightness of the screen. • Color Adjust deep and light color of the screen. Decrease ◀ ▶ Increase Less sharp ◀ ▶ Sharp • Sharpness Adjust vividness of the screen.
PICTURE • Temperature - Your TV has 5 screen temperatures (color settings): 1. Press Menu/set key to display the main OSD menu. Mode 2. Select the picture main menu. Temparature Normal 3. Press Menu/Set to enter the picture menu. VIdeo NR ◄ OFF ► 4. Select Temperature and press Menu/Set to enter the under menu. Then the Picture-Temperature under menu appear. Film Mode ◄ OFF ► Screen Format 16 : 9 5. Select the Temperature mode with CH- / CH+ button and press Menu/Set key.
PICTURE • Film Mode - This Mode is in order to watch a movie composed 24 frames smoothly when the movie is converted to 30 frames on TV 1. Press Menu/Set button to display the main OSD menu. 2. Select the picture main menu item. 3. Press Menu/Set to enter the sub menu. 4. Select Film Mode and press VOL+ button to enter the ◄► parts. Then the cursor moves into the ◄► parts. 5. Mode Turn on or off Film mode function with CH+/CH- button and press BACK button.
PICTURE • Screen Format Description 16 : 9 16:9 video: No change. 4:3 video: Expands 4:3 video signal horizontally to fit the 16 : 9 screen. Panorama 16:9 video: No change. 4:3 video: Expands 4:3 video horizontally to fit the 16 : 9 screen and to minimize distortion, sides are expanded more than center. Zoom 1 Expands 16 : 9 mode screen vertically. Zoom 2 Expands zoom 1 mode screen vertically. 4:3 16:9 video: The image is suppressed. 4:3 video: No expansion. There are gray areas besides the image.
PICTURE ( PC ) In PC mode, you can adjust the H,V-Position, Clock and Phase. Also you can adjust them automatically. • Geometry You can change H, V-Position, Clock and Phase in PC mode like usual PC monitors. You can also adjust them automatically. (Auto adjust function.) 1. Press Menu/set button to display the main OSD menu. Mode 2. Select the picture main menu with CH+, CH- button. Temperature 3. Press Menu/Set to enter the sub menu. Geometry 4.
PICTURE (PC) H-POSITION ◀ ▶ ◀ ▶ V-POSITION PHASE Mismatch Match • Native Mode - When you use TV, Native Mode display all timing to 1366 x 768 mode. - When you off Native Mode, TV display 1366 x 768 mode expect 1360 x 768. 1. 2. Select Native mode menu and press VOL+ button to enter the ◄► parts. Then the cursor moves into the ◄► parts.
SOUND In SOUND Menu, you can adjust balance, MTS ( Multi-Track Sound), AVC (Auto Volume Control) and select the equalizer settings. • Balance This control allows you to adjust the balance of the left and right speaker output. Balance 1. Press Menu/set button to display the main OSD menu. 2. Select the SOUND main menu. 3. Press Menu/Set to enter the sub menu. Spatial effect ◄ OFF ► 4. Select Balance and press Menu/Set key. AVC ◄ OFF ► 5.
SOUND • User Adjust You can use the OSD menu to change the Treble, Bass, Balance and DRC according to your preference. Select USER mode (Previous page) 1. equalizer menu appear when you select USER mode. 2. Select a gain bar with VOL+, VOLbutton on the remote control and adjust it with CH+ / CH- button. 3. Press BACK or BACK button on the remote control to exit equalizer. The result will be saved automatically. EqualIzer 0.1 0.5 1.5 5.0 10.
SOUND • MTS - Select sound signal format from the input source. There are Mono, Stereo, NICAM and Bilingual sound formats. 1. 2. 3. 4. 5. Press Menu/set button to display the main OSD menu. Balance Select the SOUND main menu with CH+ / CH- button on the remote control. Sound Mode Press Menu/Set to enter the sub menu. Spatial effect ◄ OFF ► AVC ◄ OFF ► MTS Stereo Select MTS and press Menu/Set to enter the sub menu. Then the MTS sub menu appear.
SET UP In SET UP menu, you can adjust the transparency of the OSD menu and set PIP and others. • Translucent - Adjust the transparency of the OSD menu. There are 8 step from OFF to 7. 1. Press Menu/set button to display the main OSD menu. 2. Select the SET UP main menu with CH+ / CH- keys on the remote control. 3. Press Menu/Set to enter the sub menu. PIP 4. Select Translucent and press VOL+ key to enter the ◄► parts. Then the cursor moves into the ◄► parts. Advanced 5.
SET UP • Size in PIP ( Picture In Picture ) - Change the size of the PIP window. There are 3 sizes: SMALL, Large, Twin 1. Select Size and press VOL+ button to enter the ◄► parts. Then the cursor moves into the ◄► parts. 2. Adjust size function with CH+ & CH- button and press Menu/Set button. SMALL LARGE TWIN • Source in PIP - Change the source of the PIP window. 1. 2. ◄ SMALL ► Size Select Source and press Menu/Set to enter the sub menu. Then the PIP sub menu appear.
SET UP Main TV SCART 1 SCART 2 S-Video / AV Component1 Component2 PC DVI TV O O O O O O O O SCART 1 O X O O O O O O SCART 2 O O X O O O O O S-Video O O O X O O O O Component1 O O O O X X X X Component2 O O O O X X X X PC O O O O X X X X DVI O O O O X X X X PIP • Picture Swap in PIP ( Picture In Picture ) - Swap the sources of the main screen and the PIP window. * Select Picture Swap and press Menu/Set button.
SET UP • Advanced - You can se up ID, Burn Protect, Blue Back, Language and Child Lock in Advanced Menu. 1. Press Menu/set button to display the main OSD menu. 2. Select the SET UP main menu with CH+ / CH- button on the remote control. 3. Press Menu/Set to enter the sub menu. 4. Select Advanced and press Menu/Set to enter the Advanced menu. Then the PIP sub menu appear.
SET UP • Blue Back in Advanced You can set to display blue-color screen instead of noise screen. 1. Select Blue Back and press VOL+ button to enter the ◄► parts. Then the cursor moves into the ◄► parts. 2. SetID Turn the function on or off with CH+ / CH- button and press BACK button. ◄ 99 ► BlueBack ◄ O FF ► Language ◄ ENGLISH ► Front key Lock ◄ OFF ► • Language in Advanced Set the language to use in OSD. Supported languages are English, French, German, Spanish, Italian. 1.
SET UP • V-Chip (TV parental Guidelines) - Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating. 1. Press Menu/set button to display the main OSD menu. 2. Select the SET UP main menu with CH+ / CH- keys on the remote control. ◄ OFF ► Trucelant PIP Advanced 3. Press Menu/Set to enter the sub menu. 4. After enter the password, the V-Chip sub menu appear.
SET UP • TV Blocking in V-Chip ( Continued from 60 page) - You can set up Restrictions Using the “TV Parental Guidelines” of FCC. 1. Select TV Blocking with CH+ / CHbutton on the remote control and press Menu/Set to enter the sub menu. Then the TV Blocking sub menu appear. 2. You can independently lock the TV ratings. The locked TV (FCC) ratings are indicated by the symbol ±. 3. Press CH+/CH-/VOL+/VOL- buttons and the Menu/Set button to activate the appropriate restrictions for TV (FCC) rating system.
SET UP • Movie Blocking in V-Chip ( Continued from 60 page) The Movie Blocking uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. When the Rating Controls is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings). 1. 2. 3. Select Movie Blocking with CH+ / CH- button on the remote control and press Menu/Set to enter the sub menu. Then the Movie Blocking sub menu appear.
SET UP • Change Password in V-Chip ( Continued from 60 page) 1. Select Change Password with CH+ / CH- button on the remote control and press Menu/Set to enter the sub menu. Then the Pass Word change sub menu appear. 2. TV Blocking Movie Blocking Enter the new password with numeric keys on the remote control. Change Password ◄ OFF ► V-C h i p B l o c k i n g Pass Word ____ • V-Chip Blocking in V-Chip ( Continued from 60 page) 1. Select V-Chip Blocking with CH+ / CH- buttons on the remote control.
TIME In the TIME menu, you can set the current time and auto power on / off. • Time Set Set the current time. 1. Press Menu/set button to display the main OSD menu. 2. Select the TIME main menu. 3. Press Menu/Set to enter the sub menu. On Channel ◄ 99 ► Select Time Set by pressing VOL+ button. On Volume ◄ 100 ► 4. 5. Move the cursor by pressing VOL-, VOL+ button and adjust time by CH+, CH- button.
TIME • On Channel Set the channel when TV power turn on automatically. ** Available only when the Time is set and On Time is ON. 1. Press Menu/set button to display the main OSD menu. TimeSet AM 03:29 2. Select the TIME main menu with CH+ / CH- button on the remote control. On Time AM 05:11 ON 3. Press Menu/Set to enter the sub menu. 4. Select On Channel. 5. Enter to the ◄► part with VOL+ button. Then the cursor moves into the ◄► parts. 6.
TIME • Off Time This TV can be set to turn off automatically at specific times that you choose. Before using the timer, you must set the TV’s clock as described previously. 1. Press Menu/set button to display the main OSD menu. 2. Select the TIME main menu with CH+ / CH- button on the remote control. 3. Press Menu/Set to enter the sub menu. 4. Select Off Time with CH+ / CHbutton on the remote control and press VOL+ button. 5.
Specification – 32 Inch LCD Function and Display Specification Display Size 32-Inch 16 : 9 Diagonal Screen Display Mode Variable 4 Modes (4:3 Mode/ 16:9 X 3 Modes) Pixel Format 1366x768 Physical Pixel Contrast Ratio 500:1* , 1000:1** Brightness 500* , 450** cd/㎡ Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP(picture in picture) with four selectable window positions on Video mode Input compatible Multiple input compatible Video Advanced motion digital / Motion
Specification – 32 Inch LCD Power Consumption Input Power AC 100 ~ 240V 50/60Hz Power consumption 150 Watt Connectivity TV1,2 Input RF/CATV (PAL/SECAM) Scat1,2 Input SCART X 2Port (SCART1 (HALF), SCART2 (FULL)) Composite Input/Output RCA X 2Port (AV INPUT, AV OUTPUT) Component1,2 Input RCA X 2Port (Y, Pb/Cb, Pr/Cr : 480i, 480p, 576i, 576p, 720p, 1080i) S-Video Input Mini Din 4Pin X 1Port PC Input Mini D-Sub 15Pin X 1Port / HDTV Input(480p, 576p, 720P(50/60Hz), 1080i(50/60Hz)) DVI Input Mini
Specification – 40 Inch LCD Function and Display Specification Display Size 40-Inch 15:9*, 16:9** Diagonal Screen Display Mode Variable 4 Modes (4:3 Mode/ 16:9 X 3 Modes) Pixel Format 1280x768*, 1366x768** Physical Pixel Contrast Ratio 500:1* , 800:1** Brightness 450* , 500** cd/㎡ Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP(picture in picture) with four selectable window positions on Video mode Input compatible Multiple input compatible Video Advanced moti
Specification – 40 Inch LCD Power Consumption Input Power AC 100 ~ 240V 50/60Hz Power consumption 300 Watt Connectivity TV1,2 Input RF/CATV (PAL/SECAM) Scat1,2 Input SCART X 2Port (SCART1 (HALF), SCART2 (FULL)) Composite Input/Output RCA X 2Port (AV INPUT, AV OUTPUT) Component1,2 Input RCA X 2Port (Y, Pb/Cb, Pr/Cr : 480i, 480p, 576i, 576p, 720p, 1080i) S-Video Input Mini Din 4Pin X 1Port PC Input Mini D-Sub 15Pin X 1Port / HDTV Input(480p, 576p, 720P(50/60Hz), 1080i(50/60Hz)) DVI Input Mini
Troubleshooting Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money. Problem Quick Action for Possible Solution No picture & No sound Check whether the Monitor is turned on. Power cord inserted into wall outlet? Plug another product’s power cord into the wall outlet where the Monitor’s power cord was plugged in. Picture OK & No sound Press the VOLUME( X ) key. Check the audio input signal.
