User's Manual

OWNER'S MANUAL

You can enter the TV menu and HDTV menu in TV mode only. (When you watch a TV programme.)

Choosing the Channel Type

Before your television can begin memorizing the available channels, you must specify the type of

signal source that is connected to the TV.(i.e., an antenna, a standard cable system)

Setting The Cahnnel (ATV)

Storing the Channel Automatically

* Analog Scan precedes Digital Scan on Auto Scan mode.

Press Menu/Set button to display the

main OSD menu

Select The TV main menu.

Press Menu/Set button to enter the

sub menu.

Select Auto Scan With / Button

and press Menu/Set Button on the

remote control. Then the tuning bar

will appear and scanning will start.

1. Press Menu/set button to display the

main OSD menu.

2. Select the TV Main menu.

3. Press Menu/Set to enter the sub

menu.

4. Select Channel Type(ATV) or

Channel Type(DTV)

5. Select the Channel Type(ATV) or

Channel Type(DTV) with /

button and press Exit button. You Can

select Air or CABLE.

(ATV Scan)

(HDTV Scan)