User's Manual

39
OWNER'S MANUAL
Mode
Your PDP has 3 automatic factory preset picture settings (“Standard”, “Vivid” and “Mild”).
You can choose Standard, Vivid or Mild by pressing “Picture” button on the remote control (or by making
a selection from the menu). Or you can select USER which automictically recalls your personalized picture
setting.
Press Menu/set button to display the main OSD menu.
Select the picture main menu.
Press Menu/Set to enter the sub menu.
Select Mode and press Menu/Set to enter the sub
menu. Then the picture sub mode appear.
Select the picture mode and press Menu/Set button.
You will see the picture setting bars.
Just Press BACK button on the remote control.
You can adjust each values of the picture setting,
but the changed values are stored as in USER mode.
1
2
3
4
5
6
Mode
Temparature
Video NR
Screen Format
Standard
Normal
¥OFF
16:9
Standard
Vivid
Mild
User
PICTURE
USER mode require more settings.
It has an under menu: See next page.
Contrast
Brightness
Color
Sharpness
Recall
• Alternative method : Just press the "Picture" button on the remote control. Each time it is pressed, different mode
is selected.