User Manual

3 - English
SAFETY INSTRUCTIONS FOR ALL
OPERATIONS
Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory or fasteners may contact hidden wiring.
Cuttingaccessory or fastenerscontactinga“live”wire
maymakeexposedmetalpartsofthepowertool“live”
andcouldgivetheoperatoranelectricshock.
SAFETY INSTRUCTIONS WHEN USING LONG
DRILL BITS
Never operate at higher speed than the maximum
speed rating of the drill bit. Athigherspeeds,thebitis
likelytobendifallowedtorotatefreelywithoutcontacting
theworkpiece,resultinginpersonalinjury.
Always start drilling at low speed and with the bit
tip in contact with the workpiece. Athigherspeeds,
thebitislikelytobendifallowedtorotatefreelywithout
contactingtheworkpiece,resultinginpersonalinjury.
Apply pressure only in direct line with the bit and do
not apply excessive pressure. Bitscanbendcausing
breakageorlossofcontrol,resultinginpersonalinjury.
ADDITIONAL SAFETY INSTRUCTIONS
Know your power tool. Read operator’s manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
power tool. Followingthis rule will reducethe risk of
electricshock,fire,orseriousinjury.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1 when assembling parts,
operating the tool, or performing maintenance.
Followingthisrulewillreducetheriskofseriouspersonal
injury.
Protect your lungs. Wear a face or dust mask if the
operation is dusty. Followingthis rulewill reducethe
riskofseriouspersonalinjury.
Protect your hearing. Wear hearing protection during
extended periods of operation. Following this rule will
reducetheriskofseriouspersonalinjury.
GENERAL POWER TOOL SAFETY WARNINGS
DRILL/DRIVER SAFETY WARNINGS
have the power tool repaired before use. Many
accidentsarecausedbypoorlymaintainedpowertools.
Keep cutting tools sharp and clean. Properlymaintained
cuttingtoolswithsharpcuttingedgesarelesslikelyto
bindandareeasiertocontrol.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Useofthepowertoolforoperationsdifferent
fromthoseintendedcouldresultinahazardoussituation.
Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slipperyhandlesandgrasping
surfacesdonotallowforsafehandlingandcontrolofthe
toolinunexpectedsituations.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
ofbatterypackmaycreateariskoffirewhenusedwith
anotherbatterypack.
Use power tools only with specifically designated
battery packs. Useofanyotherbatterypacksmaycreate
ariskofinjuryandfire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquidejectedfromthe
battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictablebehaviorresultinginfire,explosionorrisk
ofinjury.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposuretofireortemperature
above265°Fmaycauseexplosion.
Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Chargingimproperlyorat
temperaturesoutsidethespecifiedrangemaydamage
thebatteryandincreasetheriskoffire.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensurethatthesafetyofthepowertoolismaintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturerorauthorizedserviceproviders.