User Manual

5 - English
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V
Volts
Voltage
min
Minutes
Time
Direct Current
Typeoracharacteristicofcurrent
n
o
No Load
Speed
Rotationalspeed,atnoload
.../min
Per Minute
Revolutions,strokes,surfacespeed,orbitsetc.,perminute
ASSEMBLY
WARNING:
Donotusethisproductifitisnotcompletelyassembled
orifanypartsappeartobemissingordamaged.Useof
aproductthatisnotproperlyandcompletelyassembled
orwithdamagedormissingpartscouldresultinserious
personalinjury.
WARNING:
Do not attempt to modify this product or create
accessoriesorattachmentsnotrecommendedforuse
withthisproduct.Anysuchalterationormodificationis
misuseandcouldresultinahazardousconditionleading
topossibleseriouspersonalinjury.
Ifanypartsaredamagedormissing,pleasecall1-800-776-5191forassistance.
OPERATION
WARNING:
Donotallowfamiliaritywiththisproducttomakeyou
careless.Rememberthatacarelessfractionofasecond
issufficienttoinflictseriousinjury.
WARNING:
Always remove battery pack from the tool when you
are assembling parts, making adjustments, cleaning,
orwhennotinuse.Removingbatterypackwillprevent
accidental starting that could cause serious personal
injury.
WARNING:
Alwaysweareyeprotectionwithsideshieldsmarkedto
complywithANSIZ87.1.Failuretodosocouldresultin
objectsbeingthrownintoyoureyesandotherpossible
seriousinjuries.
WARNING:
Do not use any attachments or accessories not
recommendedbythemanufacturerofthisproduct.The
useof attachments oraccessories not recommended
canresultinseriouspersonalinjury.
APPLICATIONS
Youmayusethisproductforthepurposeslistedbelow:
Drillinginalltypesofwoodproducts(lumber,plywood,
paneling,compositionboard,andhardboard),ceramics,
plastics,fiberglass,laminates,andmetals;drivingscrews
intowoodanddrywallwithscrewdriverbits
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 9.
Tolocktheswitchtrigger,placethedirectionofrotation
selectorinthecenterposition.
Insertthebatterypackintotheproductasshown.
Makesurethelatchonthebatterypacksnapsintoplace
andthebattery pack issecuredin the productbefore
beginningoperation.
Depress the latch and pull to release and remove the
batterypack.
For complete charging instructions, see the operator’s
manualsforyourbatterypackandcharger.