Datasheet

ManualsBrandsHARTING ManualsConnectorsMultipole socket C 64-p DIN 41612

Types

signal to 2 A

Technical characteristics

Types B, 2B, C, 2C, M,

Q, 2Q, R, R (HE 11), 2R

Current carrying capacity

The current carrying capacity is limited by maximum temperature of

materials for inserts and contacts including terminals. The current

capacity curve is valid for continuous, non interrupted current loaded

contacts of connectors when simultaneous power on all contacts is

given, without exceeding the maximum temperature.

Control and test procedures according to DIN IEC 60 512

Number of contacts 16-96

Contact spacing (mm) 2.54

Working current 2 A max.

see current carrying

1 A

with insulation displacement

capacity chart 40 A max. type M

Clearance ≥ 1.2 mm

Creepage ≥ 1.2 mm

Working voltage

The working voltage also depends according to the safety regulations

on the clearance and creepage of the equipment

dimensions of the pcb itself, Explanations see chapter 00

and the associated wiring

Test voltage U

r.m.s.

1 kV

Contact resistance ≤ 15 mΩ

for wire wrap connection

≤ 20 mΩ

including crimp connection

Insulation resistance ≥ 10

Ω

Temperature range – 55 °C … + 125 °C

The higher temperature limit

includes the local ambient

and heating effects of the

contacts under load

Degree of protection for crimp terminal

IP 20

according to DIN 40 050

Electrical termination

Male connector

Solder pins for pcb connections

Ø 1.0 ± 0.1 mm

according to IEC 60 326-3

For pcb connection

Ø 0.8 + 0.3 mm on request

wrap posts 0.6 x 0.6 mm

diagonal 0.79-0.86 mm

Female connector wrap posts 0.6 x 0.6 mm

diagonal 0.79-0.86 mm

Solder pins for pcb connections

Ø 1.0 ± 0.1 mm

according to IEC 60 326-3

For pcb connection

Ø 0.8 + 0.3 mm on request

Crimp terminal 0.09-0.5 mm²

Insulation displacement

connection AWG 28/7

Insertion and withdrawal force

16way ≤ 15 N

32way ≤ 30 N

48way ≤ 45 N

64way ≤ 60 N

96way ≤ 90 N

Materials

Mouldings Thermoplastic resin,

glass-fibre filled, UL 94-V0

Contacts Copper alloy

Contact surface Contact zone: selectively

plated according to

performance level

Termination zone: tinned

Wrap posts: selectively

gold-plated on request

Explanation performance levels see chapter 00

Mating conditions see chapter 00

Working current

Ambient temperature

Pin shroud for female connectors with 0.6 x 0.6 mm

pins according to DIN 41 612

A secure interfacing system for signals from the rear of 19” racks

to connectors with wrap posts 0.6 x 0.6 mm is possible with the

use of a pin shroud.

The pin shroud protects the wrap posts on the rear side of the rack

and can be screwed to the printed circuit board.

After assembly the rear ends of the wire wrap posts become the

mating areas of the type C male connector according to DIN

41 612.

This system can now accept:

female connectors type C

female connectors type R

The locking levers provide security for the mated connectors. Fast

and simple disconnection is possible.

Fitting and removing crimp contacts

see technical characteristics chapter 02

Summary of content (19 pages)

PAGE 1
Technical characteristics Number of contacts 16-96 Contact spacing (mm) 2.54 Working current 2 A max. 1 A with insulation displacement 40 A max. type M Clearance ≥ 1.2 mm Creepage ≥ 1.2 mm Current carrying capacity The current carrying capacity is limited by maximum temperature of materials for inserts and contacts including terminals.
PAGE 2
DIN 41 612 · Type B Number of contacts Male connectors Identification Male connector with angled solder pins Male connector with straight solder pins Number of contacts Contact arrangement Part No. Performance levels according to DIN 41 612.
PAGE 3
DIN 41 612 · Type B Number of contacts Female connectors Identification Number Contact of contacts arrangement Female connector with solder pins 2.9 mm 64 Female connector with solder pins 4.5 mm 64 Female connector with wrap posts 13 mm 64 Part No. Performance levels according to DIN 41 612.
PAGE 4
DIN 41 612 · Type B Number of contacts Types signalto 2 A 64 Female connectors Identification Number of contacts Part No. 64 Performance level 2 09 02 264 6828 Drawing Dimensions in mm Female connector for insulation displacement Cable 1 Cable 1 Performance level 3 09 02 264 7828 Cable 1 to contact 1 b Contact arrangement View from termination side Panel cut out Flat cable 1) grey AWG 28/7 grey grey colour coded twisted pair1) 50.00 m 150.00 m 30.48 m 30.
PAGE 5
DIN 41 612 · complementary type 2B Number of contacts Types signal to 2 A 32, 16 Male connectors Identification Male connector with angled solder pins Male connector with straight solder pins Number Contact of contacts arrangement Part No. Performance levels according to DIN 41 612.
PAGE 6
DIN 41 612 · complementary type 2B Number of contacts Female connectors Identification Female connector with solder pins 2.9 mm Female connector with solder pins 4.5 mm Number Contact of contacts arrangement Part No. Performance levels according to DIN 41 612. Explanation chapter 00 3 2 32 Types signalto 2 A 32 1 09 22 232 6824 Performance level 3 on request 32 Performance level 1 on request 09 22 232 6825 Female connector with press-in pins Part Nos.
PAGE 7
DIN 41 612 · Type C Number of contacts Types signal to 2 A 96, 64, 32 Male connectors Identification Male connector with angled solder pins Male connector with straight solder pins Part No. Number Contact of contacts arrangement Performance levels according to DIN 41 612.
PAGE 8
DIN 41 612 · Type C Number of contacts Types signalto 2 A 96, 64, 32 Female connectors Identification Female connector with solder pins 2.9 mm Female connector with kinked solder pins1) 2.9 mm Female connector with solder pins 4.5 mm Female connector with kinked solder pins1) 4.5 mm Female connector with wrap posts 13 mm Number Contact of contacts arrangement Part No. Performance levels according to DIN 41 612.
PAGE 9
Types signalto 2 A DIN 41 612 · Type C Identification Drawing Dimensions in mm Female connectors type C DIN 41 612 a 2.9 4.5 13 Standard Solder pins Wrap posts row Kinked pins position Solder pins a b 2.9 2.75 4.5 4.35 b= ^ Length of kinked pins Panel cut out Board drillings Mounting side all holes position row Identification strips see chapter 40 01 .
PAGE 10
DIN 41 612 · Type C Number of contacts Types signalto 2 A 64 Female connectors Number of contacts Identification Part No.
PAGE 11
DIN 41 612 · complementary type 2C Number of contacts Types signal to 2 A 48, 32, 16 Male connectors Identification Male connector with angled solder pins Male connector with straight solder pins Number Contact of contacts arrangement Part No. Performance levels according to DIN 41 612.
PAGE 12
DIN 41 612 · complementary type 2C Number of contacts Female connectors Identification Female connector with solder pins 2.9 mm Female connector with solder pins 4.5 mm Number Contact of contacts arrangement Part No. Performance levels according to DIN 41 612. Explanation chapter 00 3 2 48 Types signalto 2 A 48 1 09 23 248 6824 Performance level 3 on request 48 Performance level 1 on request 09 23 248 6825 Female connector with press-in pins Part Nos.
PAGE 13
DIN 41 612 · Type M Number of contacts Types signalto 2 A 78+2, 60+4, 42+6, 24+8 Male connectors Identification Male connector with angled solder pins Part No. Number Contact of contacts arrangement Performance levels according to DIN 41 612.
PAGE 14
DIN 41 612 · Type M Number of contacts Female connectors Identification Female connector with solder pins 2.9 mm Number Contact of contacts arrangement Performance levels according to DIN 41 612. Explanation chapter 00 3 2 78 + 2 09 03 278 6804 60 + 4 09 03 260 6804 42 + 6 09 03 242 6804 24 + 8 Female connector with solder pins 4.5 mm Part No.
PAGE 15
DIN 41 612 · Special contacts type M I III V IV II VI VII Types signalto 2 A High current contacts High voltage contacts Part No. Performance level 2 Identification Drawing Dimensions in mm High current male contacts for male connectors1) I for straight crimp termination 10 A 20 A 40 A 10 A 20 A 40 A 09 03 000 6113 09 03 000 6114 09 03 000 6115 09 03 000 6123 09 03 000 6124 09 03 000 6125 ø A ø B wire gauge [mm²] AWG 10 A 1.85 2.55 1.5 16 20 A 2.80 3.70 4 12 40 A 4.40 5.
PAGE 16
DIN 41 612 · Special contacts type M I IV II V Types signalto 2 A III Coaxial contacts Identification Part No.
PAGE 17
DIN 41 612 · Type R Number of contacts Types signal to 2 A 96, 64, 32 Male connectors Identification Male connector with solder pins 2.5 mm Male connector with solder pins 4.0 mm Male connector with wrap posts 13 mm Part No. Number Contact of contacts arrangement Performance levels according to DIN 41 612.
PAGE 18
DIN 41 612 · Type R Number of contacts Female connectors Identification Part No. Number Contact of contacts arrangement Performance levels according to DIN 41 612.
PAGE 19
DIN 41 612 · Type Q Number of contacts Types signal to 2 A 64 Male connectors Identification Male connector with solder pins 2.5 mm Male connector with solder pins 4.0 mm Male connector with wrap posts 13 mm Part No. Number Contact of contacts arrangement Performance levels according to DIN 41 612.