Datasheet

03
.
05
RJ Industrial
09 45 151 1100
Technical characteristics General information
Connectors
IP 20 Data connectors
Connector set
incl. housing, cable gland
and instruction manual
Identification Part No. Drawing Dimensions in mm
Transmission properties in accordance with
Category 5 ISO/IEC 11 801:2002 and EN 50173-1
Protection level: IP 20
Mating interface: RJ 45 in accordance with
IEC 60603-7
Wire gauge data
1)
: AWG 22 - 24 stranded
AWG 22 - 23 solid
Temperature range: -40 °C … +70 °C
Cable sheath diameter: 6.5 mm - 6.9 mm
Mating cycles: min. 750
Housing material: Thermoplastic, black
UL 94-V0
The IP 20 Data connector complies with the require-
ments of industrial applications. This RJ 45 Ethernet
connector can be connected to AWG-22 cables with
IDC technology and is designed with a standard pitch
of just 14 mm, which guarantees maximum packing
density in the application. An additional latching clip on
the housing makes its significantly easier to unlock the
connector.
This connector can be assembled on site, permitting
Industrial Ethernet installation cable to be connected
directly to IP 20 devices located inside a control
cabinet. A special panel feed through to provide the
transition between protection level IP 67 and IP 20 is
therefore not necessary. This lessens the installation
work required from the customer, while the reduced
number of contact points offers increased reliability.
Connectors
1)
Details see technical data sheet Stock items in bold type