Datasheet
English
General Description
Specifi cation
Target markets
Machinery & Robotics Automation
Industrial network
infrastructures
Wind Energy,
Solar Energy
Transportation Shipbuilding
■ Full Gigabit Ethernet non-blocking switch architecture according to IEEE
802.3
■ Support of jumbo frames (10 kB)
■ Variants with industrial temperature range of -40°C ... +70°C
■ Surge protection and reverse polarity protection
■ Minimum energy consumption due to energy-efficient Ethernet
4 to 7 Ethernet ports RJ45 and FOC
Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control
cabinets
Commercial temp.: 0
°C ... +55°C / Industrial temp.: -40°C ... +70°C
Ethernet ports 10BASE-Te / 100BASE-TX EEE / 1000BASE-TX EEE
Type of connection
RJ45
Auto-negotiation
Yes
Auto-polarity
Yes
Auto-MDI(X)
Yes
Transfer conditions
Twisted pair
Transfer speed
10 / 100 / 1000 Mbit/s
Transfer length
100 m (Twisted Pair, Cat 5)
Power supply
Nominal voltage
24 VDC
48 VDC
Permissible voltage range
9 VDC ... 60 VDC
Surge protection
Yes
Reverse polarity proof
Yes
Starting current
1.60 A 3.20 A
Overcurrent protection at input
Yes (4 A)
Max. power consumption
@ 24 VDC
3.00 W ... 5.16 W
Conductor cross-section
0.08 mm² ... 2.5 mm² (28 AWG ... 12 AWG)
Type of connection
3-pole, pluggable screwed contact
Pinout
+ / - /
Supply circuit (according to 60950)
SELV (circuit breaker 10 A)
The Ha-VIS eCon 2000 Full Gigabit family of unmanaged Ethernet switches
is equipped with up to 7 gigabit Ethernet ports and allow for cost-effi cient
and quick expansion and/or reconstruction of network infrastructures
with high bandwidth requirements. In this, all switches support extra-long
Ethernet frames (jumbo frames). Due to the extremely fl at design, these
switches can be accommodated in installations where space is restricted
towards the cable connection at the front. The selection includes various
combinations of variants with RJ45 and bre optic ports. Automatic
detection of the transmission rate (auto-negotiation) and of the wiring
of the twisted pair data cable (auto-polarity and auto-MDI(X)) allow for
simple plug & play. All variants are available with the temperature ranges
"Industrial" and "Commercial".
Ha-VIS eCon 2000 Full Gigabit Ethernet Basic
HARTING Technologiegruppe
P.O.Box 1473, D-32325 Espelkamp
Wilhelm-Harting-Straße 1, D-32325 Espelkamp, Germany
Service hotline: +49 5772 47-97100, Fax: +49 5772 47-495
Electric@HARTING.com, www.HARTING.com
Note: We reserve the right to make technical changes to the products and to the content of this
document at any time without prior noti cation. The HARTING Technologiegruppe does not ac-
cept any responsibility for possible errors or incompletions in this document. We reserve all the
rights to this document and the topics and illustrations contained within it. Copying, disclosure to
third parties or use of its content - even partially - is forbidden without the prior written consent
of the HARTING Technologiegruppe.
Switch features
Housing width 60 mm 120 mm
Number of ports
5 7
Switching technology
Store and Forward
Supported standards
IEEE 802.3
Frame size
10 kBytes
MAC table size
8k entries
Paket bu er size
1 Mbit
Non-blocking
Yes
Quality of service
Yes
Energy-effi cient Ethernet
Yes
PROFINET-compatible
Yes
EthernetIP-compatible
Yes
Ethernet ports 1000BASE-SX / 1000BASE-LX
Type of fi bre Multi-mode (MM) Single-mode (SM)
Type of connection
SC Duplex
Transfer conditions
FOC
Wavelength
850 nm 1310 nm
Transfer speed
1000 Mbit/s
Transfer length
0.55 km 10 km
Output power
-9.5 dBm ... -4 dBm -9.5 dBm ... -3 dBm
Input sensitivity
≤ -17 dBm ≤ -21 dBm
Energy
Efficient
Ethernet
Ambient conditions
Commercial temperature range
0°C ... +55°C
Industrial temperature range
-40°C ... +70°C
Storage temperature range
-40°C ... +85°C
Relative humidity (operation)
0% ... 95% (not-condensing)
Relative humidity (storage and
transport)
0% ... 95% (not-condensing)
Air pressure (operation)
2000 m (795 hPa)